brander brandt niet goed, of de cdroms zijn niet goed??

[anoniem]

Hoi, ik heb een maand terug een brander gekocht van de MediaMarkt, namelijk de NU DVDRW (voor €55,-, goedkoop dus lekker meegenomen). Ik heb eerst geprobeerd met CD-R s van Imation te branden, de eerste lukte erg goed, de tweede niet. Ik kreeg een foutmelding. Vandaag heb ik een MMORE CD-R gebruikt, en bij die kreeg ik ook een foutmelding. Ik gebruik Nero 6.6.0.3, hier zijn de logs die het progje na de foutmelding meldt: [b:516c9490d8]Log 1 (met een Imation CD-R, 52x):[/b:516c9490d8] Windows 98 4.90 (ME) IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-9-1999 12:06:00 ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 17:35:34 Nero version: 6.6.0.3 (Nero Express) Recorder: <NU DVDRW DDW-081> Version: BX31 - HA 1 TA 1 - 6.6.0.3 Adapter driver: <ESDI_506> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <NU DVDRW DDW-081 >Version: BX31 - HA 1 TA 1 - 6.6.0.3 Adapter driver: <ESDI_506> HA 1 NU DVDRW DDW-081 (Target 1, D:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 24117248 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 127MB (130496kB) Free physical memory: 0MB (40kB) Memory in use : 100 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.12.2004 CD-ROM (ISO) 21:50:08 #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 21:50:08 #2 Text 0 File Burncd.cpp, Line 2866 NU DVDRW DDW-081 Seamless Link activated 21:50:08 #3 Text 0 File Reader.cpp, Line 127 Reader running 21:50:08 #4 Text 0 File Writer.cpp, Line 122 Writer NU DVDRW DDW-081 running 21:50:08 #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 21:50:08 #6 Text 0 File Burncd.cpp, Line 3151 Turn on Track-at-once, using CD-R/RW media 21:50:09 #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 359850 ( 80:00.00) Last address to be written: 162815 ( 36:12.65) 21:50:09 #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 21:50:09 #9 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: NU DVDRW DDW-081; CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 21:50:09 #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:50:09 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 162816 (162816) = #162816/36:10.66 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 162814 blocks [NU DVDRW DDW-081] -------------------------------------------------------------- 21:50:09 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [NU DVDRW DDW-081] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 333754368, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 162816 | lead-out | 1 | 0x41 | 0x00 21:50:09 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105 Removed 2 run-out blocks from end of track 1. Length: 162816 -> 162814. 21:50:09 #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 21:50:09 #15 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 21:50:09 #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 21:50:09 #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 40x (6.000 KB/s) 21:50:09 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:50:09 #19 Text 0 File Mmc.cpp, Line 21025 Set BUFE: Seamless Link -> ON 21:50:20 #20 SCSI -1135 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02C30000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 21:50:20 #21 CDR -1135 File Writer.cpp, Line 311 Write error 21:50:20 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:50:20 #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:50:20 #24 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state NU DVDRW DDW-081\H1 T1 21:50:20 #25 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 21:50:20 #26 Text 0 File Mmc.cpp, Line 15737 <NU DVDRW DDW-081 > start Close Session 21:50:20 #27 SCSI -1122 File Cdrdrv.cpp, Line 1176 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x57 Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x57 0x00 21:50:20 #28 CDR -1122 File WriterStatus.cpp, Line 249 Unable to recover TOC 21:50:20 #29 TRANSFER -19 File WriterStatus.cpp, Line 249 Could not perform Fixation 21:50:20 #30 Text 0 File WriterStatus.cpp, Line 258 falling back to disc fixation 21:50:20 #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 40x (6.000 KB/s) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11-3-2002 10:55:38 File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 30-6-2004 13:15:50 File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 30-6-2004 13:15:50 File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 30-6-2004 13:15:50 File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 8-6-2000 17:00:00 File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 8-6-2000 17:00:00 File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 8-6-2000 17:00:00 File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 8-6-2000 17:00:00 (Adapter driver for rec) [b:516c9490d8]Log 2 (met een MMORE CD-R, 52x):[/b:516c9490d8] Windows 98 4.90 (ME) IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10-9-1999 12:06:00 ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 17:35:34 Nero version: 6.6.0.3 (Nero Express) Recorder: <NU DVDRW DDW-081> Version: BX31 - HA 0 TA 1 - 6.6.0.3 Adapter driver: <ESDI_506> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <NU DVDRW DDW-081 >Version: BX31 - HA 0 TA 1 - 6.6.0.3 Adapter driver: <ESDI_506> HA 0 NU DVDRW DDW-081 (Target 1, D:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ? Excluded drive IDs: WriteBufferSize: 24117248 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 127MB (130496kB) Free physical memory: 0MB (36kB) Memory in use : 100 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.2.2005 CD-ROM (ISO) 17:26:19 #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 17:26:19 #2 Text 0 File Burncd.cpp, Line 2866 NU DVDRW DDW-081 Seamless Link activated 17:26:19 #3 Text 0 File Reader.cpp, Line 127 Reader running 17:26:19 #4 Text 0 File Writer.cpp, Line 122 Writer NU DVDRW DDW-081 running 17:26:19 #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 17:26:19 #6 Text 0 File Burncd.cpp, Line 3151 Turn on Track-at-once, using CD-R/RW media 17:26:20 #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 359850 ( 80:00.00) Last address to be written: 281824 ( 62:39.49) 17:26:20 #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 17:26:20 #9 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: NU DVDRW DDW-081; CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 17:26:20 #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:26:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 281825 (281825) = #281825/62:37.50 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 281823 blocks [NU DVDRW DDW-081] -------------------------------------------------------------- 17:26:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [NU DVDRW DDW-081] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 577484800, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 281825 | lead-out | 1 | 0x41 | 0x00 17:26:20 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105 Removed 2 run-out blocks from end of track 1. Length: 281825 -> 281823. 17:26:20 #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 17:26:20 #15 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 17:26:20 #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 17:26:20 #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 40x (6.000 KB/s) 17:26:20 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:26:20 #19 Text 0 File Mmc.cpp, Line 21025 Set BUFE: Seamless Link -> ON 17:29:55 #20 SCSI -1135 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02C70000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x03 0x38 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 17:29:55 #21 CDR -1135 File Writer.cpp, Line 311 Write error 17:29:55 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 17:29:55 #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 17:29:55 #24 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state NU DVDRW DDW-081\H0 T1 17:29:55 #25 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 17:29:55 #26 Text 0 File Mmc.cpp, Line 15737 <NU DVDRW DDW-081 > start Close Session 17:30:15 #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 40x (6.000 KB/s) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11-3-2002 10:55:38 File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 30-6-2004 13:15:50 File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 30-6-2004 13:15:50 File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 30-6-2004 13:15:50 File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 8-6-2000 17:00:00 File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 8-6-2000 17:00:00 File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 8-6-2000 17:00:00 File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 8-6-2000 17:00:00 File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 8-6-2000 17:00:00 (Adapter driver for rec) ------------------- Ik hoop dat iemand me kan helpen :cry:

[anoniem]

Dit moest natuurlijk onder 'Anders (hardware)', sorry mods :oops:

[anoniem]

Ach, het zijn maar 5 klikken >> Anders (hardware)

[anoniem]

zet bij je brander de DMA aan!! Sluit hem bij voorkeur aan als MASTER en niet als Slave. Check bij de maker van je brander naar een medialist. DVD branders moet je heden ten dage zien icm het soort media dat je gebruikt. Check ook of ze firmware updates hebben en of deze je probleem zullen verhelpen.