anoniem Geplaatst: 28 april 2003 Delen Geplaatst: 28 april 2003 Mijn Dynalink serieel modem V1456VQE wil ik weer gaan gebruiken. Ik bezit een aantal voedingen: 6V, 9V, 12V, 24V en kan niet meer ontdekken op welke spanning dit modem werkt. De 24V voeding lijkt het beste te passen, maar 24V voor een modem? Wie kan mij helpen. Quote Link naar reactie
anoniem Geplaatst: 28 april 2003 Auteur Delen Geplaatst: 28 april 2003 .90 Support, 56000bps data modem with automatic fallback. DATA/FAX/TAM. Full hardware modem. Voice mode allows a DTE to record and playback voice (with supplied software). Caller ID support. Real Audio, 8 bits PCM. V.42 error correction (LAPM and MNP). V.42bis and MNP class 5 data compression. ITU V.24, RS-232C serial interface. IS-101 AT+V commands with extensions. TIA/EIA 602 standard for AT command set. TIA/EIA 578 class 1 FAX. DTE speed up to 115200. Supports power down mode. 14400bps send and receive fax modem with automatic fallback. ITU-T V.42bis data compression. Group 3 send and receive facsimile. Auto-mode detection allows differing connection modes. Extended AT command set. Operating system support: DOS, Windows 3.x/9x/ME/NT4/2000/XP, Linux. Power Supply 12 Volts AC 1 Amp. eff zoeken met google. de volgende keer zelf oke :wink: Quote Link naar reactie
anoniem Geplaatst: 30 april 2003 Auteur Delen Geplaatst: 30 april 2003 Bedankt, maar op Google had ik natuurlijk al gekeken. Veel modems Dynalink V1456 VQE gevonden, maar allemaal met een letter er achter: 1456VQE-C of i.d. Mijn modem is een V 1456 VQE, zonder iets er achter. Werkt niet met 12V. [quote:b25e0a1540="plextor"].90 Support, 56000bps data modem with automatic fallback. DATA/FAX/TAM. Full hardware modem. Voice mode allows a DTE to record and playback voice (with supplied software). Caller ID support. Real Audio, 8 bits PCM. V.42 error correction (LAPM and MNP). V.42bis and MNP class 5 data compression. ITU V.24, RS-232C serial interface. IS-101 AT+V commands with extensions. TIA/EIA 602 standard for AT command set. TIA/EIA 578 class 1 FAX. DTE speed up to 115200. Supports power down mode. 14400bps send and receive fax modem with automatic fallback. ITU-T V.42bis data compression. Group 3 send and receive facsimile. Auto-mode detection allows differing connection modes. Extended AT command set. Operating system support: DOS, Windows 3.x/9x/ME/NT4/2000/XP, Linux. Power Supply 12 Volts AC 1 Amp. eff zoeken met google. de volgende keer zelf oke :wink:[/quote:b25e0a1540] Quote Link naar reactie
anoniem Geplaatst: 30 april 2003 Auteur Delen Geplaatst: 30 april 2003 [quote:5095d9bd38="Johan Dulac"]Bedankt, maar op Google had ik natuurlijk al gekeken. Veel modems Dynalink V1456 VQE gevonden, maar allemaal met een letter er achter: 1456VQE-C of i.d. Mijn modem is een V 1456 VQE, zonder iets er achter. Werkt niet met 12V. [quote:5095d9bd38="plextor"].90 Support, 56000bps data modem with automatic fallback. DATA/FAX/TAM. Full hardware modem. Voice mode allows a DTE to record and playback voice (with supplied software). Caller ID support. Real Audio, 8 bits PCM. V.42 error correction (LAPM and MNP). V.42bis and MNP class 5 data compression. ITU V.24, RS-232C serial interface. IS-101 AT+V commands with extensions. TIA/EIA 602 standard for AT command set. TIA/EIA 578 class 1 FAX. DTE speed up to 115200. Supports power down mode. 14400bps send and receive fax modem with automatic fallback. ITU-T V.42bis data compression. Group 3 send and receive facsimile. Auto-mode detection allows differing connection modes. Extended AT command set. Operating system support: DOS, Windows 3.x/9x/ME/NT4/2000/XP, Linux. Power Supply 12 Volts AC 1 Amp. eff zoeken met google. de volgende keer zelf oke :wink:[/quote:5095d9bd38][/quote:5095d9bd38] Hij zal toch echt met 12 volt werken, misschien wissel/gelijk stroom? Wat is het ampérage van de voeding, misschien is hij gewoon niet sterk genoeg. (of de modem is gewoon stuk). Quote Link naar reactie
anoniem Geplaatst: 1 mei 2003 Auteur Delen Geplaatst: 1 mei 2003 Eerst de lichtste proberen die past dan telkens 1 zwaarder ?? Quote Link naar reactie
Aanbevolen berichten
Om een reactie te plaatsen, moet je eerst inloggen