anoniem Geplaatst: 26 oktober 2005 Delen Geplaatst: 26 oktober 2005 Heb gisteren mijn DVD drives geflasht. Eerst de brander Nec 3450A via een download van de Dangerous Brothers http://tdb.rpc1.org/ daarna nog geen probleem. Toen de DVD speler GDR8163B . Heb de voorzichtige manier gekozen via autoreset / RPC2 , dit werd geadviseerd in de Readme voor onervaren gebruikers ( zoals ik). quote: If you have not used an RPC1 firmware before, and even if you have, we strongly recommend that you try the Auto Reset. einde quote Daarna doen beide DVD spelers het niet meer! In apparaatbeheer verwijderen en opnieuw opstarten helpt niet. Stuurprogramma bijwerken lukt ook niet. Ik gebruik XP Prof. Wat nu ? Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 Terugflashen naar de oude BIOS-versies. Die heb je toch nog ergens bewaard? :wink: Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 Helaas ........ Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 Dan officiële firmware van deze drives erin flashen, niet die van Dangerous Bros. http://forum.rpc1.org/dl_all.php Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 Bedankt, ik zal het vanavond proberen. Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 Maar kan ik nog wel flashen ? Wanneer ik moet aangeven welke drive moet worden geflasht zal de DVD drive toch niet herkend worden ? Dan nog een vraagje. In de link die je eerder gaf http://forum.rpc1.org/dl_firmware.php?download_id=1871 staat mijn Dell niet. Welke firmware moet ik nemen? Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 [quote:45bd052bf0="charrie"]Maar kan ik nog wel flashen ?[/quote:45bd052bf0]Ja, op dezelfde manier zoals je de andere geflasht hebt. [quote:45bd052bf0="charrie"]Wanneer ik moet aangeven welke drive moet worden geflasht zal de DVD drive toch niet herkend worden ?[/quote:45bd052bf0]Als die drives niet meer bij apparaatbeheer staan, dan weer toevoegen met de hardware wizard. [quote:45bd052bf0="charrie"]staat mijn Dell niet. Welke firmware moet ik nemen?[/quote:45bd052bf0]De firmware op de site van Dell? [url=http://support.euro.dell.com/support/downloads/index.aspx?c=nl&cs=nldhs1&l=nl&s=dhs]Downloads[/url] Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 Bedankt voor alle adviezen. Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 De NEC deed het eerst nog wel na het flashen? Mogelijk is dan de 2e dvd speler de oorzaak. Haal die eens uit je pc en kijk of de nec het dan weer doet. Dit heeft alleen zin als ze op de zelfde kabel zitten lijkt me. Let dan ook op Master en Slave instellingen. Quote Link naar reactie
anoniem Geplaatst: 26 oktober 2005 Auteur Delen Geplaatst: 26 oktober 2005 De drivers van de Dell site gedownload. Maar krijg de melding "no device found". Ook via hardware en stuurprogramma bijwerken lukt het niet, ik kan daarmee de gedownloade bestanden niet openen. Quote Link naar reactie
anoniem Geplaatst: 27 oktober 2005 Auteur Delen Geplaatst: 27 oktober 2005 Heeft het zin de drives fysiek los te koppelen en ze dan opnieuw aan te sluiten? Quote Link naar reactie
anoniem Geplaatst: 27 oktober 2005 Auteur Delen Geplaatst: 27 oktober 2005 Het werkt weer dankzij een tip van MGspecial: Je kan het onderstaande proberen,niet geschoten is altijd mis. To resolve this behavior, follow these steps: Start Registry Editor (Regedt32.exe). Locate the UpperFilters value under the following key in the registry: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318} On the Edit menu, click Delete, and then click OK. Locate the LowerFilters value under the same key in the registry: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318} On the Edit menu, click Delete, and then click OK. Quit Registry Editor.NOTE: After you remove the Upperfilters value and the Lowerfilters value, if you notice lost functionality in a particular program, such as CD recording software, you may need to reinstall that software. If the problem recurs, consult with the software vendor for assistance. Restart your computer. Quote Link naar reactie
Aanbevolen berichten
Om een reactie te plaatsen, moet je eerst inloggen