anoniem Geplaatst: 21 mei 2004 Auteur Delen Geplaatst: 21 mei 2004 CATALYST™ Beta 1 for Windows XP 64 bit for AMD64 http://www.ati.com/support/drivers/winxp/radeon-xp64.html?type=xp64&prodType=graphic&prod=productsXP64driver&submit.x=14&submit.y=7&submit=GO%21 Quote Link naar reactie
anoniem Geplaatst: 21 mei 2004 Auteur Delen Geplaatst: 21 mei 2004 Dat werd tijd zeg dat ATI met een 64-bit driver kwam, heb je hem al getest? jij draaide toch ook WinXP 64-bit? Quote Link naar reactie
anoniem Geplaatst: 21 mei 2004 Auteur Delen Geplaatst: 21 mei 2004 Nee ik heb hem er niet meer opstaan, maar heb wel de CD gebrand. Ik ben en ff wat aan het downen wat ik af wil maken, pas daarna probeer ik het denk ik ff. Zal wel za of zon worden Quote Link naar reactie
anoniem Geplaatst: 21 mei 2004 Auteur Delen Geplaatst: 21 mei 2004 Ik denk dat ik op me nieuwe pc een multi boot ga maken tzt, Windows XP gewoon en Windows XP 64-bit, is dat niets voor jou? Quote Link naar reactie
anoniem Geplaatst: 21 mei 2004 Auteur Delen Geplaatst: 21 mei 2004 Ja, dat doe ik denk ik ook als ik m'n nieuwe nForce mobo heb, voor de via K8 zijn geloof ik namelijk nog geen 64 bits agp-chipsetdrivers alleen IDE Verder heb ik nu nog steeds die 18 gig hd erin en heb nu dus ruimte te kort. Quote Link naar reactie
anoniem Geplaatst: 21 mei 2004 Auteur Delen Geplaatst: 21 mei 2004 Ik dacht dat je een nieuwe SCSI schijf had besteld die groter was.. Ik ben erg benieuwd hoe een nForce 3 250gb systeem met een x800XT en Windows 64-bit loopt. Quote Link naar reactie
anoniem Geplaatst: 21 mei 2004 Auteur Delen Geplaatst: 21 mei 2004 Ja maar die gebruik ik pas in als ik alles compleet heb, mobo, vidkaart etc. Ik heb m'n nieuwe accrylkast al gebouwd met daarin een nieuwe stillere voeding en de HD is er ook al in gebouwd met ronde SCSI-bekabeling etc. Daar ga ik dan op over als de rest komt compleet met een fresh XP install met evt. multiboot. Daar zing ik het dan mee uit tot S939 met PCI-E verschijnt. Quote Link naar reactie
anoniem Geplaatst: 21 mei 2004 Auteur Delen Geplaatst: 21 mei 2004 Dan vermoed ik dat we ongeveer tegelijk de Catalyst Beta 1 voor 64-bits gaan testen, nu nog UT2004 64-bits Quote Link naar reactie
anoniem Geplaatst: 3 juni 2004 Auteur Delen Geplaatst: 3 juni 2004 [size=18:65e11ed326]Beta Catalyst 4.6:[/size:65e11ed326] http://www.tweakers.net/meuktracker/6314 Ik wacht wel op de final, zal wel niet lang meer duren. Quote Link naar reactie
anoniem Geplaatst: 9 juni 2004 Auteur Delen Geplaatst: 9 juni 2004 Catalyst 4.6 is uit :D http://www.ati.com/support/drivers/winxp/radeonwdm-xp.html?type=xp&prodType=graphic&prod=productsXPdriver&submit.x=10&submit.y=4 Quote Link naar reactie
anoniem Geplaatst: 10 juni 2004 Auteur Delen Geplaatst: 10 juni 2004 Goeie timing van ATI, net als ik me ATI X800 PRO binnen heb 8) zal ze direct testen vanavond Quote Link naar reactie
anoniem Geplaatst: 10 juni 2004 Auteur Delen Geplaatst: 10 juni 2004 [quote:84dac409e5="Red Dragon"]Goeie timing van ATI, net als ik me ATI X800 PRO binnen heb 8) zal ze direct testen vanavond[/quote:84dac409e5] ben helemaal niet nieuwsgierig hoor ;) en en en en en en.......................... :D Quote Link naar reactie
anoniem Geplaatst: 10 juni 2004 Auteur Delen Geplaatst: 10 juni 2004 zie 3dmark topic Quote Link naar reactie
anoniem Geplaatst: 15 juni 2004 Auteur Delen Geplaatst: 15 juni 2004 Voor de liefhebbers, [b:86b3539ecd]Catalyst 4.7 beta.[/b:86b3539ecd] Ondersteund eindelijk Temporal AA volgens het onderstaande verhaal: http://www.tweakers.net/meuktracker/6446 Maar ik heb het zelf nog niet gevonden ps. ik heb ze nu draaien met me X800 PRO. nog geen problemen. Quote Link naar reactie
anoniem Geplaatst: 17 juni 2004 Auteur Delen Geplaatst: 17 juni 2004 [quote:f1caaa4089][b:f1caaa4089]ATI Radeon Omega Drivers 2.5.51[/b:f1caaa4089] Was the wait that long? Sorry, I was working on something important that I wanted to share upon the release of these drivers, and here it is: omegadrivers.net Ops! Forgot, the drivers... What's New? (2k/XP 2.5.51) * Based on the official Catalyst 4.6 drivers. * Updated the Omega version of RadLinker (1010), now Radlinker includes a new skin option and ads support x800 overclocking. * Added some tweaks for OLG. Enabled OGL Triple Buffer by default. * Added support for MANY NEW Radeon cards, FireGL cards and Mobility chipsets. ANY card should be supported now and the drivers will always install. * Now the drivers should work a LOT better on laptops. * Fixed FireGL card support, now it has full CP support and fully working OGL. * Changed the installer graphics. * Added a new option in the installer to select a faster OLG driver instead of just using the latest one, this driver runs Counter Strike like butter. Important note: The special OGL driver will NOT work on x800 cards. * The package keeps growing in size, the drivers will keep being distributed in compressed CAB format to save some bandwidth, it must be decompressed using one of these tools (latest version): WinAce, WinRAR or WinZip. Then run the extracted file to start installation of the drivers. * Opened a new site! Hope that's all, have been working for the last 16 hours straight just to get the site done on time for the drivers release and can no longer coordinate correctly. You can get them on my new site. BTW, I was planning on adding another surprise to the drivers, but couldn't finish it, maybe in an update. [/quote:f1caaa4089] http://www.omegadrivers.net/ Quote Link naar reactie
anoniem Geplaatst: 17 juni 2004 Auteur Delen Geplaatst: 17 juni 2004 [quote:6a88bdda41="Red Dragon"]Voor de liefhebbers, [b:6a88bdda41]Catalyst 4.7 beta.[/b:6a88bdda41] Ondersteund eindelijk Temporal AA volgens het onderstaande verhaal: http://www.tweakers.net/meuktracker/6446 Maar ik heb het zelf nog niet gevonden ps. ik heb ze nu draaien met me X800 PRO. nog geen problemen.[/quote:6a88bdda41] Waarom gaat het nu ineens zo snel met die Catalyst drivers? Toen de 4.4 net uit was duurde het volgens mij wel minstens een maand voordat er weer nieuwe uitkwamen. nu is het al bijna een week of twee... :-? Quote Link naar reactie
anoniem Geplaatst: 18 juni 2004 Auteur Delen Geplaatst: 18 juni 2004 nee het is nog steeds elke maand de 4 staat voor 2004 Het nummer erachter voor de maand dat hij uitkomt. 4.1 is dus Januari 2004 4.6 is dus Juni 2004 Deze release die ik heb gepost is de Beta versie van 4.7 de officieele versie 4.7 komt dus volgende maand uit. Voor je gevoel is het misschien om de 2 weken maar het is toch echte leke maand. Quote Link naar reactie
anoniem Geplaatst: 18 juni 2004 Auteur Delen Geplaatst: 18 juni 2004 okeej, bedankt weten we dat ook weer.. :D :) Quote Link naar reactie
anoniem Geplaatst: 22 juni 2004 Auteur Delen Geplaatst: 22 juni 2004 leuk interview met Dave Orton http://www.driverheaven.net/dhinterviews/daveorton/ [quote:692e3f4627][b:692e3f4627]Allan[/b:692e3f4627]: When I was recently chatting to you in Canada we discussed driver development and progress, with the fact ATI are a leader in Direct3d performance/stability but are sadly lacking in the OpenGL sector especially when compared to your main competitor, can you detail how ATI under your leadership plan to improve this? [b:692e3f4627]Dave[/b:692e3f4627]: We are always looking for ways to improve our products. And a key part of that is our software. Many of the improvements that we have made in the software area are already evident. For example, we have improved our testing processes, resulting in more frequent and more stable drivers and we have implemented a feedback program to learn of driver bugs early on so we can rectify them. Some of the improvements aren’t evident yet, but will be soon. It’s readily apparent that the work we’ve done on the DX driver is world class. We are confident we will do whatever is necessary to make our OGL driver the new industry standard for stability and performance. [/quote:692e3f4627][quote:692e3f4627] [b:692e3f4627]Allan[/b:692e3f4627]: Catalyst has been an incredible success for ATI and it's widely recognised that ATI appear to value their dedicated enthusiast following by pioneering many radical schemes such as the ATI beta testing user group headed up by Terry Makedon, how would you like to see Catalyst developing over the coming years? [b:692e3f4627]Dave[/b:692e3f4627]: CATALYST is a software suite that is the ultimate in performance, stability, and innovation. It will constantly evolve to what the market demands. Our first priority was stability and that is what our main focus has been since we launched CATALYST. However, deep within ATI’s driver research departments, we have been working on a project that will bring a whole new level of usability for VPU software. This product will be launched before the end of this year, and we are very excited about it -- it will be a major step forward in terms of exposing more control and usability, something that users are asking us for. As long as people keep using CATALYST CREW (ATI’s feedback mechanism) we will continue to let our users tell US what the future of CATALYST holds.[/quote:692e3f4627] ben benieuwd :) Quote Link naar reactie
anoniem Geplaatst: 22 juni 2004 Auteur Delen Geplaatst: 22 juni 2004 Dat gaat dus over die drivers met de nieuwe lay-out. duurt nog wel lang zeg, einde van dit jaar. Ik ben zeker ook benieuwd wat ATI met deze drivers in peto heeft. Quote Link naar reactie
Aanbevolen berichten
Om een reactie te plaatsen, moet je eerst inloggen