anoniem Geplaatst: 9 april 2004 Auteur Delen Geplaatst: 9 april 2004 heeft iemand ook benchmark voordeel gemerkt met de niewe drivers? :) Quote Link naar reactie
anoniem Geplaatst: 11 mei 2004 Auteur Delen Geplaatst: 11 mei 2004 De [b:1608104d40]Beta Catalyst 4.5[/b:1608104d40] drivers die ik al een tijdje gebruik zijn nu geleaked: http://downloads.guru3d.com/download.php?det=784 Ik gebruik ze nu ruim 2 weken en ze werken prima hier. Quote Link naar reactie
anoniem Geplaatst: 11 mei 2004 Auteur Delen Geplaatst: 11 mei 2004 Ga ze gelijk ff proberen... Quote Link naar reactie
anoniem Geplaatst: 11 mei 2004 Auteur Delen Geplaatst: 11 mei 2004 [quote:11cb5ceda1="Red Dragon"]De [b:11cb5ceda1]Beta Catalyst 4.5[/b:11cb5ceda1] drivers die ik al een tijdje gebruik zijn nu geleaked: http://downloads.guru3d.com/download.php?det=784 Ik gebruik ze nu ruim 2 weken en ze werken prima hier.[/quote:11cb5ceda1] Welke bugfixes of andere nieuwigheden zitten er in ? Enig idee wanneer de officieele versies te zien zullen zijn ? (Beta's laat ik liever over aan de waaghalzen op dit forum ;)) Quote Link naar reactie
anoniem Geplaatst: 11 mei 2004 Auteur Delen Geplaatst: 11 mei 2004 Offcieele versie verwacht ik wel in de loop van deze maand. JaFO je kan met gerust hart deze versie instaleren hoor, ik heb nog geen enkele problemen gevonden in games. Deze drivers zaten bij de X800 PRO en XT die de reviewers kregen, deze drivers zijn erg stabiel Helaas heb ik geen change log Quote Link naar reactie
anoniem Geplaatst: 12 mei 2004 Auteur Delen Geplaatst: 12 mei 2004 'tuurlijk ... maar een paar weken wachten op de officieele versie met een volledige changelist kan ook geen kwaad. Ik heb toch geen spellen die (nu) problemen opleveren voor zover ik weet heet dat. Quote Link naar reactie
anoniem Geplaatst: 12 mei 2004 Auteur Delen Geplaatst: 12 mei 2004 Dat is waar, zo lang hoef je denk ik niet te wachten, week of 1 a 2 gok ik. Quote Link naar reactie
anoniem Geplaatst: 13 mei 2004 Auteur Delen Geplaatst: 13 mei 2004 Ze staan nu al op de site van ati! de officiele Catalyst4.5 drivers... :D Heb ze net geinstalleerd. http://www.ati.com/support/driver.html Quote Link naar reactie
anoniem Geplaatst: 13 mei 2004 Auteur Delen Geplaatst: 13 mei 2004 LOL dat was dus een dag ipv een week of twee ;) Quote Link naar reactie
anoniem Geplaatst: 13 mei 2004 Auteur Delen Geplaatst: 13 mei 2004 Mooi, als ik thuiskom ga ik ze meteen installeren. Quote Link naar reactie
anoniem Geplaatst: 13 mei 2004 Auteur Delen Geplaatst: 13 mei 2004 [quote:ac0b7d5bcd="JaFO"]LOL dat was dus een dag ipv een week of twee ;)[/quote:ac0b7d5bcd] :D valt weer mee, is inderdaad sneller dan ik dacht. Ik zie dat het nog steeds build 801 is met driver versie 6444, exact hetzelfde als de Beta driver. Ik zal de FAQ vandaag ook maar weer updaten. Quote Link naar reactie
anoniem Geplaatst: 13 mei 2004 Auteur Delen Geplaatst: 13 mei 2004 het doet het goed bij mijn 4.5 cat Quote Link naar reactie
anoniem Geplaatst: 19 mei 2004 Auteur Delen Geplaatst: 19 mei 2004 Omega 4.5 is er ook weer. [quote:4ed9a9f17e]For anyone who prefers the Omega flavour of ATi drivers to the 'vanilla' variety, set aside some time for downloading and driver installing, because a new set based around Catalyst 4.5 are now available! The version number is 2.5.44, and apparantly there are a very large number of changes in the driver this time around: - Based on the Catalyst 4.5 drivers. - Updated the Omega version of RadLinker (1008), now the Profiler include options to enable TAA modes and to establish the desired TAA Threshold for D3D apps. - Added and removed a LOT of tweaks, ATI changed some internal settings and some old tweaks won't work anymore from now on. - Fixed support for Mobility 9700. - Fixed the "Hibernation not working" problem in laptops. - Added support for the Following laptop wide screen resolutions: 800x480, 960x600, 1024x600, 1024x480, 1280x600, 1280x768, 1280x800, 1680x1050, 1920x1200 - Re-enabled a desktop wide resolution: 1280x768 - Added an EXCLUSIVE new Omega utility which adds the ability to SWAP between the soft-mod and the normal driver without the need to re-install the whole drivers. (Thanks to Chris W, Author of RadLinker) - Removed Artifact Tester 5 from the package. (Sorry Alberto) - Included the latest version of ATITool. (Thanks W1zzard) - Since the package has grown in size I will be distributing the installer in compressed CAB format to save some bandwidth, it must be decompressed using one of these tools (latest version): WinAce, WinRAR or WinZip. Then run the extracted file to start installation of the drivers. You can download the drivers from the usual place, [url=http://www.omegacorner.com/]Omega Corner[/url]. [/quote:4ed9a9f17e] incl TAA dus, das wel lekker :) Oh, en over die cheat van ati [quote:4ed9a9f17e]There has been a lot of discussion about our trilinear filtering recently. In an effort to clear this up, ATI is holding a live web chat today, May 19, 2004 at 3pm EST, 9pm CET. Speakers: - Andy Pomianowski, Staff Engineer, and architect of our image analysis and compression algorithms. - Raja Koduri, Engineering manager, graphics architecture and performance tools, one of ATI's experts on performance and image quality. To chat live, please visit us at 3pm EST, 9pm CET.[/quote:4ed9a9f17e] Goede aktie lijkt me van ze. Quote Link naar reactie
anoniem Geplaatst: 19 mei 2004 Auteur Delen Geplaatst: 19 mei 2004 Errr shit!!! Ik krijg ze niet open. .cab? Wat moet ik doen? Quote Link naar reactie
anoniem Geplaatst: 19 mei 2004 Auteur Delen Geplaatst: 19 mei 2004 [quote:761ecbc244="Jasper G."]Errr shit!!! Ik krijg ze niet open. .cab? Wat moet ik doen?[/quote:761ecbc244] winrar -> www.rarsoft.com geloof ik Quote Link naar reactie
anoniem Geplaatst: 19 mei 2004 Auteur Delen Geplaatst: 19 mei 2004 [quote:c116759a00="hjs"][quote:c116759a00="Jasper G."]Errr shit!!! Ik krijg ze niet open. .cab? Wat moet ik doen?[/quote:c116759a00] winrar -> www.rarsoft.com geloof ik[/quote:c116759a00]Ik heb winrar, maar het heeft niet geholpen. Ik heb er helemaal een aparte tool voor moeten downloaden, maar ik heb ze nu :) Ik ga ze zo even uitproberen, maar ik verwacht geen snelheid winst over de CAT4.5 drivers Quote Link naar reactie
anoniem Geplaatst: 19 mei 2004 Auteur Delen Geplaatst: 19 mei 2004 Vreemd, van de omega site [quote:c1c329fb63]* Since the package has grown in size I will be distributing the installer in compressed CAB format to save some bandwidth, it must be decompressed using one of these tools (latest version): WinAce, WinRAR or WinZip. Then run the extracted file to start installation of the drivers.[/quote:c1c329fb63] Je had een oudere versie van winrar? Quote Link naar reactie
anoniem Geplaatst: 19 mei 2004 Auteur Delen Geplaatst: 19 mei 2004 Met winrar 3.30 Final kan je die CAB zonder problemen openen, heb de omega drivers hier ook draaien. Quote Link naar reactie
anoniem Geplaatst: 19 mei 2004 Auteur Delen Geplaatst: 19 mei 2004 ik hem ook gewoon in windows xp openen zonder programma's :roll: Quote Link naar reactie
anoniem Geplaatst: 19 mei 2004 Auteur Delen Geplaatst: 19 mei 2004 [quote:762ac835ba="hjs"]Vreemd, van de omega site [quote:762ac835ba]* Since the package has grown in size I will be distributing the installer in compressed CAB format to save some bandwidth, it must be decompressed using one of these tools (latest version): WinAce, WinRAR or WinZip. Then run the extracted file to start installation of the drivers.[/quote:762ac835ba] Je had een oudere versie van winrar?[/quote:762ac835ba]Ah, Ik heb 3.20 Werkt wel erg goed die Omegas. Geen ghosting een vrij goede performance. De beeld qualiteit is ook een enorm stuk better. Quote Link naar reactie
Aanbevolen berichten
Om een reactie te plaatsen, moet je eerst inloggen