Ga naar inhoud

-= Radeon Topic deel 11 =-


Aanbevolen berichten

  • Reacties 128
  • Aangemaakt
  • Laatste reactie
Eynstein heeft nu een rare kaart [quote:c4f5a33488][b:c4f5a33488]Point Of View ATI 8500 64Mb DDR[/b:c4f5a33488] Snelle VGA kaart van Point of View met ATI 8500 chipset. Snelheid [color=green:c4f5a33488]275/250Mhz[/color:c4f5a33488], 64Mb DDR geheugen. DVI uitgang (met DVI dongle), TV uitgang (incl. kabels). Hydravision! [/quote:c4f5a33488] Al over gemaild, maar volgens hun is het echt zo
Link naar reactie
Quote van GoT en SkinnerEd is er helemaal mee eens ;) [quote:81f21d5beb]Het valt mij trouwens op dat heel veel mensen problemen hebben met hun radeon 9700. Ik heb helemaal geen last, superstabiel,draait alles, ziet erg echt vet uit!!!!!!!! Een paar tips: -Neem een voeding van een goed merk die 350 watt of hoger is(enermax, antec,etc) -De kaart loopt vast als de fsb met meer als 12% verhoogd wordt(en daarbij de agp/pci poort met 12%), dit heb ik ondervonden door veel op rage 3d te kijken. -ik ben zelf op intel overgestapt vanwege hun chipsets, die zijn echt onovertroffen en superstabiel.Ik had hiervoor Via, Sis, Etc, maar die leveren toch vaak problemen op. -Probeer eerst de pc te draaien zonder je creative soundcard hiermee zijn ook vaak problemen. -Doe een clean install van windows als je de radeon 9700 gaat gebruiken. -Let op dat er geen irq's wordeb geshared. -zorg voor een beetje ventilatie in je kast. [/quote:81f21d5beb]
Link naar reactie
Tbreak heeft de Hercules Radeon 9700 pro onder handen genomen [img:2f5652f317]http://www.tbreak.com/mira/imageview.php?image=410[/img:2f5652f317] een smakelijk kaartje :D Overklokken is geen probleem: [quote:2f5652f317]The Copper Heatsink on the Hercules Radeon 9700 PRO looks quite good and we were expecting some decent overclocking out of [b:2f5652f317]it. We used Hercules' bundled utility "3D Tweaker" which can go to a maximum of 377MHz Core and 359MHz memory (DDR 720MHz). [/b:2f5652f317]One small problem with this utility is that it reduces the clock setting between 3-5MHz whenever you hit the apply button- meaning that if you take the slide to 360MHz for the core and hit the apply or the test button, the slider moves back to 356MHz or so. Using the 3D Tweaker we took the core value up to the maximum allowed 377MHz, however, the slider would drop donw to 371MHz. At this core speed, the card performed completely stable which is pretty good considering its a full 50MHz higher than the original speed. We were'nt as lucky with memory overclocking where anything above 330MHz (DDR 660MHz) started producing artifacts and anything over 335MHz (DDR 670) would result in the card crashing. The following are some of the benchmarks at stock vs overclocked speeds.[/quote:2f5652f317] Ook leuk is de conclusie: [quote:2f5652f317]We have Gigabyte's retail version of the Radeon sitting in our labs as well and the software bundle for that is much better and its priced lower. Of course, the Hercules overclocks better, however, the difference in scores is just for a "mine's bigger than yours" argument and not substantial. If you consider yourself such a person, then by all means, go ahead and get this card. [/quote:2f5652f317] :lol: 8) [url=http://www.tbreak.com/reviews/article.php?id=148]Klik hier voor de complete review[/url] deze kaart wil ik ook nog wel is gaan testen :)
Link naar reactie
[quote:d16e186820="Hu'uruun"]Wat denken jullie eigenlijk, zal de NV30 van Nividia de high-end markt van de Radeon weer overnemen of zal Ati er een goed antwoord op kunnen leveren?[/quote:d16e186820] ik weet het niet, nVidia moet natuurlijk goed terug komen, maar ati heeft nog wel wat mogelijkheden, als is het alleen al om de 0.15 micron terug te brengen naar 0.13 in de R9700 Pro, en ze hebben natuurlijk nog een maxx mogelijkheid (2 gpu's) Heb ik het niet eens over de R350.
Link naar reactie
Niets zo grillig als de 3D-wereld. zoals HJS al aangeeft heeft ATI nog wat kaarten achter de hand. IK Verwacht wel dat nVidia tijdelijk de leiding gaat nemen met de NV30 maar ATI zal dit zeker beantwoorden. Je kan geen zinnig woord zeggen over wat er gaat gebeuren, in Januari van dit jaar had ik niet verwacht dat ATI met de R300 core zo'n klapper zou neerzetten. ps. de Radeon 9700 pro vandaag moeten inleveren :cry: zit hier weer met een TNT2. :( krijg deze week echter me GeForce 4 ti 4400 weer terug, das teminste wat :-?
Link naar reactie
[quote:fbf63267bf="Red Dragon"] ps. de Radeon 9700 pro vandaag moeten inleveren :cry: zit hier weer met een TNT2. :( krijg deze week echter me GeForce 4 ti 4400 weer terug, das teminste wat :-?[/quote:fbf63267bf] Tenminste wat? je wordt verwend :D ;) Ik verwacht ook dat nvidia de preformence crown weer terug zal pakken en dat er daarna weer een brute ATI kaart komt. Zo gaat het eigenlijk altijd een beetje. Ook gaan de ontwikkelingen op het gebied van grafische kaarten erg snel. Niets daalt zo snel als de prijs van een grafische kaart. De concurrentei tussen de 2 grootmachten is gewoon fel en dat levert ons veel smakelijke kaarten voor redelijke prijzen op.
Link naar reactie
//Marcel moet je ook maar is 2 a 3 weken een Radeon 9700 pro in je pc hebben hangen ipv een Geforce 4 ti 4400. dan moet je ook ineens afkicken, best zwaar hoor :x //R350 Ik las op www.guru3d.com nog wat over ATI en ze R350 [quote:5452b85c9c]According to [url=http://digitimes.com/NewsShow/Article3.asp?datePublish=2002/09/30&pages=02&seq=3]Digitimes[/url] ATI Technologies recently revealed that it will launch a new R350 chip and later a more simplified RV350 to brace for the competition from Nvidia’s NV30 in the fourth quarter. Following their usual production policies, Nvidia will adopt the latest 0.13-micron process for its NV30 chip line, while ATI will continue using the more mature 0.15-micron process to ensure yield rates. [i:5452b85c9c]Besides the manufacturing process, ATI did not give any more details about product specifications for the new R350 and RV350 chips. Though the unit cost for 0.15-micron processing is generally higher than for 0.13-micron processing, ATI noted that the better yield rate that the 0.15-micron process delivers will be able to cover the overall cost gap. Still, it is believed that the competitiveness offered by the different processes will become clearer when Nvidia’s 0.13-micron NV30 chips hit the market in volume after November. In addition to the R350 and RV350 chips, ATI disclosed that it may also introduce a RV280 chip, based on the Radeon 9000 core, by the end of this year to support the rising demand for AGP 8x technology. However, with the roll-out, ATI will no doubt experience a fast-expanding product portfolio, as the company has scheduled to launch the four-pipeline Radeon 9500 series in October as well. [/i:5452b85c9c] To create more specific marketing segments, Wang Pao-chu, ATI’s CEO for Greater China, said that the company will adjust product lines depending on future market response. Let me close this news-bulletin with stating that this is unconfirmed rumor, gossip, speculation. [/quote:5452b85c9c] Tja dan word het een harde strijd in het voorjaar van 2003. goeie zaak :)
Link naar reactie

Gearchiveerd

Dit topic is nu gearchiveerd en gesloten voor verdere reacties.

  • Populaire leden

    Er is nog niemand die deze week reputatie heeft ontvangen.

  • Leden

    Geen leden om te tonen


×
×
  • Nieuwe aanmaken...