anoniem Geplaatst: 28 juni 2002 Auteur Delen Geplaatst: 28 juni 2002 Idd, ik wacht ook nog ff aangezien de preformence winst maar minimaal is. Met de Via4.40 wacht ik nog ff op mijn nieuwe geluidskaart en dat doe ik wel als ik mijn HD formateer (komt Linux bij :P ). Ik had ook geen preformence winst met de 4.40a drivers en heb nu weer gewoon de 4.37a drivers aangezien deze mij erg bevallen. Link naar reactie
anoniem Geplaatst: 30 juni 2002 Auteur Delen Geplaatst: 30 juni 2002 Beyond 3d heeft de 29.42 drivers voor ons getest met een GeForce 4 ti op Aniso. [quote:b9516273b0]Difference in anisotropic filtering between drivers on a GeForce4 Ti ? A quick page I drummed up after reading about newer NVIDIA drivers resulting in different anisotropic filtering quality and performance (the former for the worse, the latter for the better) compared to older drivers while on either a GeForce3 or GeForce4 Ti. I used a VisionTek GeForce4 Ti4600 for this article. The only drivers I have that are prior to the two previous official drivers (28.32 and 29.42) are the 27.51s which is what I used for this article, comparing it to the latest official 29.42s. Medal Of Honor Allied Assault was used, with com_maxfps set to 500 and everything else set to maximum with the exception of shadow quality set to Simple. Although the built-in framerate counter was enabled, screenshots taken (using the F11 key) do not show the framerate readout. I have provided my own framerate readout, which is what the framerate counter read the minute I hit the F11 key. Anisotropic filtering settings (Level 2, Level 4 and Level 8) were set using the standard NVIDIA OpenGL properties page. There are two sets of screenshots for every anisotropic filtering level - the normal looking one plus one of the colored mipmaps. Anti-aliasing was not enabled at all for all screenshots which are at 1024x768x32bits. Personally, I see no difference in terms of overall image quality or anisotropic filtering quality between the two driver sets. The performance differences, however, are as follows : [b:b9516273b0]27.51 From 2xAniso to 4xAniso : 197.5 to 179.3 = 18.2fps = 9.22% drop From 4xAniso to 8xAniso : 179.3 to 142.9 = 36.4fps = 20.30% drop From 2xAniso to 8xAniso : 197.5 to 142.9 = 54.6fps = 27.65% drop 29.42 From 2xAniso to 4xAniso : 213.3 to 205.1 = 8.2fps = 3.84% drop From 4xAniso to 8xAniso : 205.1 to 200.0 = 5.1fps = 2.49% drop From 2xAniso to 8xAniso : 213.3 to 200.0 = 13.3fps = 6.24% drop[/b:b9516273b0] Besides the fact that performance has increased overall throughout all anisotropic filtering levels in the 29.42s compared to the 27.51s, the percentage drop in performance going from one level of anisotropic filtering to the next has drastically been reduced in the 29.42s compared to 27.51s. [/quote:b9516273b0] Meer [url=http://www.beyond3d.com/reverend/gf4aniso/index.php]HIER[/url] Weer zien we dat voor de GeForce 4 ti serie de 29.42 drivers beter zijn met ANISO dan de voorgangers. 29.60 zijn nog beter overigens. Link naar reactie
anoniem Geplaatst: 30 juni 2002 Auteur Delen Geplaatst: 30 juni 2002 Nou maar hopen dat die 30xx het in d3d ook zo goed gaan doen. Link naar reactie
anoniem Geplaatst: 12 juli 2002 Auteur Delen Geplaatst: 12 juli 2002 Nieuwe drivers@ guru3d!! de [b:be9c3eb777]Detenator 30.30[/b:be9c3eb777] drivers [quote:be9c3eb777]I've just uploaded the new Detonator drivers version 30.30 to our fastest available file-mirror (100MBit) to cope with the ammount of traffic that is inbound. Yes, detonator drivers revision[b:be9c3eb777] 30.30 [/b:be9c3eb777]are out in the flavors Windows 98/Me/2000 and XP. These drivers are not official and thus considered beta ! Grab them while they are hot, also let us know what you think of them ! [i:be9c3eb777]Compatible with: RIVA TNT2/TNT2 Pro/RIVA TNT/Aladdin TNT2 Vanta/Vanta LT RIVA TNT2 Ultra/ RIVA TNT2 Model 64/Model 64 Pro/GeForce 256/GeForce DDR/Quadro/GeForce2 MX/MX 400/GeForce2 MX 100/200/Quadro2 MXR/EX/GeForce2/Integrated GPU/GeForce2 GTS/GeForce2 Pro/GeForce2 Ti/GeForce2 Ultra/Quadro2 Pro/GeForce4 MX 460/GeForce4 MX 440/GeForce4 MX 420/Quadro4 500/550 XGL/Quadro4 200/400/Quadro DCC/NVS/NV18/NV18GL/0x01F0/ GeForce3/GeForce3 Ti 200/GeForce3 Ti 500/Quadro DCC/GeForce4 Ti 4600/GeForce4 Ti 4400/GeForce4 Ti 4200/Quadro4 900 XGL/Quadro4 750 XGL/Quadro4 700 XGL[/i:be9c3eb777] Grab them [url=http://www.guru3d.com/files/detonator/]right here[/url]. Daves edit: Come on into the forums for help on the install if you need it, we have a section dedicated to nvidia drivers. BTW I've just virus-checked the archive and intalled the drivers. These are the real thing [img:be9c3eb777]http://www.guru3d.com/-/20020712-01.jpg[/img:be9c3eb777] [/quote:be9c3eb777] Zodra ik me AthlonXP 2200+ heb geinstaleerd (dinsdag, woensdag a.s) zal ik ze meteen testen Omdat ik opnieuw winXP ga instaleren ga ik weer terug naar DirectX 8.1 MOet zeggen dat ik geen problemen met DirecX 9 beta heb gehad maar zo heb ik ze wel lang genoeg getest. tenslote zijn ze expired in augustus. Link naar reactie
anoniem Geplaatst: 12 juli 2002 Auteur Delen Geplaatst: 12 juli 2002 Lekker, die wil ik wel proberen Link naar reactie
anoniem Geplaatst: 12 juli 2002 Auteur Delen Geplaatst: 12 juli 2002 probeer ze maar ff.. graag met Aniso getest. en dan even vergelijken met een ander driver (liefst 29.42) dan weet ik vast welke het beste is. ik gebruik nu de 29.60 overigens. die was voor mij het snelste tot nu toe. Link naar reactie
anoniem Geplaatst: 12 juli 2002 Auteur Delen Geplaatst: 12 juli 2002 Nou maar kijken of d3d aniso sneller is geworden. Link naar reactie
anoniem Geplaatst: 13 juli 2002 Auteur Delen Geplaatst: 13 juli 2002 En heb je ze al getest Edward? ik heb ze nog niet kunnen testen.. iemand anders? Link naar reactie
anoniem Geplaatst: 14 juli 2002 Auteur Delen Geplaatst: 14 juli 2002 [quote:e4642c4104="Red Dragon"]En heb je ze al getest Edward? ik heb ze nog niet kunnen testen.. iemand anders?[/quote:e4642c4104] Er is bijna niemand die ze op aniso test, ik wel dus en er is in d3d aniso nog niet veel veranderd, in openGL zijn ze wel wéér iets sneller. UT2003 lijkt ook sneller, bep. checkpoints hebben een hogere fps. Link naar reactie
anoniem Geplaatst: 14 juli 2002 Auteur Delen Geplaatst: 14 juli 2002 Thnx Edward.. ik zal ze deze week testen (als alles mee zit) ik zit te wachten op me nieuwe moederbord en unlockte AXP 2200+. als ik dat binnen heb ga ik de 29.42, 29.60 en 30.30 testen op Aniso. Link naar reactie
anoniem Geplaatst: 14 juli 2002 Auteur Delen Geplaatst: 14 juli 2002 Guru3d heeft uitgebreid de 30.30 en 29.42 drivers getest http://www.guru3d.com/tech/detonator3030/ Link naar reactie
anoniem Geplaatst: 14 juli 2002 Auteur Delen Geplaatst: 14 juli 2002 Is niemand het opgevallen dat je nou in rivatuner in openGL kan kiezen voor performance of quality aniso. Link naar reactie
anoniem Geplaatst: 14 juli 2002 Auteur Delen Geplaatst: 14 juli 2002 ik neem aan dat je RC 11 bedoeld? ik heb er nog niet op geled maar als ik thuis ben zal ik er is naar kijken. enig idee of het iets uitmaakt? Link naar reactie
anoniem Geplaatst: 15 juli 2002 Auteur Delen Geplaatst: 15 juli 2002 Ja de laatste rivatuner, performance is veel sneller dan met quality en ik zie zo gauw geen verschillen in IQ, dus de keuze is duidekijk :) Als ze dit nou ook eens in d3d voor elkaar kregen... Link naar reactie
anoniem Geplaatst: 15 juli 2002 Auteur Delen Geplaatst: 15 juli 2002 [quote:5b0299ad66="SkinnerEd"]Ja de laatste rivatuner, performance is veel groter dan met quality en ik zie zo gauw geen verschillen, dus de keuze is duidekijk :) Als ze dit nou ook eens in d3d voor elkaar kregen...[/quote:5b0299ad66] Ik had de optie wel gezien, wist niet dat dat nieuw was ;) Link naar reactie
anoniem Geplaatst: 15 juli 2002 Auteur Delen Geplaatst: 15 juli 2002 Ik zie hem nu ook staan. staat nu bij mij op Performance en Level 4 Idd. nu D3D nog. Link naar reactie
anoniem Geplaatst: 15 juli 2002 Auteur Delen Geplaatst: 15 juli 2002 Ik zie hem nu ook staan. staat nu bij mij op Performance en Level 4 Idd. nu D3D nog. Link naar reactie
anoniem Geplaatst: 22 juli 2002 Auteur Delen Geplaatst: 22 juli 2002 Weer andere drivers, voor de mensen die er niet genoeg van krijgen: [quote:a7697d1422]Although you probably want to go with Detonator 30.30 (in our download section) dets 30.00 just leaked on the web. This time it was Mark Fox who got his hands on this release. Here's what he has to say about them: The driver is dated 06/06/2002 and this is a generic multilanguage release so all nvidia cards to date are supported. So far there's no word on performance yet. Nvidia Detonator Driver 30.00 Beta for Windows 98/ME/2000/XP Driver dated 06/06/02 - 6th of June 2002 All Nvidia cards to date supported Full multi-language support nView support present Win2K/XP driver not compatible with old Refresh Rate Fixes - use RivaTuner RC11 instead. Unofficial beta release - not supported by Nvidia - install only @ your own risk! The Windows 9x/ME and 2000/XP file already is on our file-server[/quote:a7697d1422] Let op de 30.30 drivers zijn nieuwer. ik heb de 30.00 nog niet getest maar ik moet zeggen dat ik de 30.30 met suc6 heb draaien. ik heb er onder andere me huidge 3dmark2001se score van 12231 mee gehaald. de 30.00 drivers zijn uiteraard te dowloaden op de vertrouwde nederlandse website www.guru3d.com met dank aan Hilbert Hagedoorn Link naar reactie
anoniem Geplaatst: 22 juli 2002 Auteur Delen Geplaatst: 22 juli 2002 Er zijn trouwens ook nieuwe omega drivers www.driverheaven.net Link naar reactie
anoniem Geplaatst: 1 augustus 2002 Auteur Delen Geplaatst: 1 augustus 2002 Wederom nieuwe drivers geleaked. ditmaal versie [b:b4c6aac037]30.82[/b:b4c6aac037] [quote:b4c6aac037]Detonator drivers version 30.82! have been released by PNY for Windows 2000/XP. No Win9x/ME driver is available at this time. The driver version is [b:b4c6aac037]30.82 [/b:b4c6aac037]and its dated 07/16/2002 and this is a generic release so all Nvidia cards to date are supported. [url=http://www.guru3d.com/files/detonator/]download drivers[/url][/quote:b4c6aac037] Link naar reactie
Aanbevolen berichten
Gearchiveerd
Dit topic is nu gearchiveerd en gesloten voor verdere reacties.