anoniem Geplaatst: 13 november 2002 Delen Geplaatst: 13 november 2002 Ben niet echt de expert maar met geheugen helemaal niet. Wat houd de aanduiding CAS eigenlijk in, wat zegt dit over de kwaliteit en/of performance? thnx Link naar reactie
anoniem Geplaatst: 13 november 2002 Auteur Delen Geplaatst: 13 november 2002 CAS Latency is one of several performance related timings for SDRAM. This measurement is the time it takes to strobe in the Row Address, and to activate the bank. When a burst read cycle is initiated, the addresses are set up and RAS\ and CS\ (chip select) are held low on the next clock cycle (rising edge of CLK), thereby activating the sense amplifiers on the bank. A period of time equal to tRCD (RAS\ to CAS\ delay) must pass after which CAS\ and CS\ are held low (again, at the next clock cycle). After the time period for tCAC (column access time) has passed the first bit of data is on the output line and can be retrieved (at the next clock cycle). The basic rule is that CAS latency times the clock speed (tCLK) must be equal or greater than tCAC (or CL x tCLK >= tCAC). This means that the column access time is the limiting factor for CAS Latency. Link naar reactie
anoniem Geplaatst: 13 november 2002 Auteur Delen Geplaatst: 13 november 2002 Maw.. hoe lager de CAS hoe hoger de snelheid!! :D Veel merkgeheugen zoals Corsair garanderen Cas 2 (snelst op het moment).. de snelheidswinst is niet geweldig groot, maar als je de mogelijkheid hebt om Cas2 geheugen te kopen zou ik dat zeker doen! :) Link naar reactie
anoniem Geplaatst: 13 november 2002 Auteur Delen Geplaatst: 13 november 2002 Staat BTW ook in de FAQ, dat ding is er niet voor niets :roll: Link naar reactie
Aanbevolen berichten
Gearchiveerd
Dit topic is nu gearchiveerd en gesloten voor verdere reacties.