anoniem Geplaatst: 22 oktober 2002 Delen Geplaatst: 22 oktober 2002 Weet iemand hoe ik mijn processor kan oc'en(^ AXP 2000+/K7VTA3) Link naar reactie
anoniem Geplaatst: 22 oktober 2002 Auteur Delen Geplaatst: 22 oktober 2002 DIT ----> http://forum.computertotaal.nl/phpBB/viewtopic.php?t=60465 al gelezen?! Link naar reactie
anoniem Geplaatst: 23 oktober 2002 Auteur Delen Geplaatst: 23 oktober 2002 Natuurlijk. :D MAAR, er schijnt een probleem te zijn met het moederbord, waardoor de cpu niet kan worden overgeklokt. Mijn vraag is dan of iemand hier een oplossing voor heeft. Ik heb op google ook niks gevonden. :( Link naar reactie
anoniem Geplaatst: 23 oktober 2002 Auteur Delen Geplaatst: 23 oktober 2002 Hoezo een probleem? wat heb je gedaan en wat gebeurd er (niet)? Vertel altijd alles van de 'situatie' anders weten de mensen hier net zo weinig als jij zelf ;) Link naar reactie
anoniem Geplaatst: 23 oktober 2002 Auteur Delen Geplaatst: 23 oktober 2002 Er zit een soort beveiliging op het moederbord ofzo. Laat eigenlijk maar, het schijnt dus dat ik 'm niet kan overklokken. Link naar reactie
anoniem Geplaatst: 23 oktober 2002 Auteur Delen Geplaatst: 23 oktober 2002 [quote:53b02740ed="Jasper G."]Er zit een soort beveiliging op het moederbord ofzo. Laat eigenlijk maar, het schijnt dus dat ik 'm niet kan overklokken.[/quote:53b02740ed] Het schijnt... en je kon er niets over je mobo vinden? Hoe kom je daar dan aan? Link naar reactie
anoniem Geplaatst: 24 oktober 2002 Auteur Delen Geplaatst: 24 oktober 2002 "BIOS stands for "Basic Input/Output System" and the K7VTA3 V3.x certainly lives up to the "basic" part. While all the standard features are present, and even a full selection of RAM timings, there is little else for the enthusiast to get excited about. ECS has included a Frequency Control section, but the only option present is to adjust the FSB to several pre-selected speeds. There are no BIOS options for core voltage, processor multiplier or DDR voltage, among others and the board is not well suited to high-end overclocking. The board also features an onboard, hardware jumper to select between 100 and 133 MHz AGP/PCI dividers, further limiting overclocking opportunities and creating a real issue at the 166 MHz FSB." :evil: Link naar reactie
anoniem Geplaatst: 24 oktober 2002 Auteur Delen Geplaatst: 24 oktober 2002 Dan moet het dus nog wel software matig kunnen met bijvoorbeeld cpucool ( www.podien.de ) en er is misschien ook nog wel een OC bios voor dat ding. Link naar reactie
Aanbevolen berichten
Gearchiveerd
Dit topic is nu gearchiveerd en gesloten voor verdere reacties.