anoniem Geplaatst: 24 maart 2002 Delen Geplaatst: 24 maart 2002 Wie kan mij vertellen tot welke grote de harddisk ondersteuning is in het volgende bios. Bios type Award Modulair Bios v4.51PG Bios ID: 07/28/98-i440BX-<<P2B>>-00 Bios Eval: ASUS P2B ACPI BIOS Revision 1005 Chipset: Intel 440BX/ZX rev 2 Superio: Winbond 977TF rev 0 found at port 3Foh (Pentium 2 350 Mhz) En waar kan ik eventueel een update vandaan halen?. Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Die update kan je [url=http://download.asus.com.tw/mb_dl_menu.asp]hier[/url] vandaan halen. Waarschijnlijk fixt die bios ieg ook de 32 GB Disksize limit. De nieuwste bios voor jou mobo is overigens de 1012. _________________ [url=http://www.anandtech.com/mysystemrig.html?rigid=16255]PC 1[/url] [url=http://www.anandtech.com/mysystemrig.html?rigid=16256]PC 2[/url] [url=http://home.quicknet.nl/qn/prive/ma.ansink/OCguide1.htm]BA's overclocking guide v1.0[/url] [ Dit Bericht is bewerkt door: BA op 2002-03-24 12:25 ] Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Volgens bij kan kan dat verschillen want je kunt op meerdere manieren dat berekenen. Het aantal sectors * head * enz. (weet ik niet meer) Maar als je een schijf hebt die niet herkend word dan kn het zijn dat je in het bios de schijf op LBA Detectie methode. Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Alle harddisks van tegenwooordig gebruiken de LBA medthode, dus dat moet geen probleem zijn. Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Alvast bedankt,...maar nu vond ik deze -pflash.exe- "Flash for P2B Series Motherboard Solve for P2B series motherboard having unknown Flash ROM detected. ASUSTeK COMPUTER INC. " En ik vond deze "Download bxd21123.zip (213952 bytes, 2000/3/13)" Waarin een bestand zit 1012d2.003 Ben nu enigzins verward :???: Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Waar heb je die file vandaan? die 1012.003 is de biosfile, en die pflash.exe is het flashprogramma. Lees de instructies die er bij zitten eens, daarin staat oa hoe je hem gebruiken moet. Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Via de link die je eerder gaf kwam ik deze file's tegen. Even verder zoeken en toen kwam ik nog de aflash.zip file tegen versie 2.1 en 2.2 (heb ze allebei gedownload) Bij die aflash.zip zit het progr. aflash.exe en een textfile met uitleg. Managing and Updating Your BIOS ----------------------------------------------------------------------------------- 1.1 Upon First Use of the Computer System It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory Writer utility (AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later. AFLASH.EXE is a Flash Memory Writer utility that updates the BIOS by uploading a new BIOS file to the programmable flash ROM on the motherboard. This file works only in DOS mode. To determine the BIOS version of your motherboard, check the last four numbers of the code displayed on the upper left-hand corner of your screen during bootup. Larger numbers represent a newer BIOS file. 1.Type FORMAT A:/S at the DOS prompt to create a bootable system floppy disk. DO NOT copy AUTOEXEC.BAT & CONFIG.SYS to the disk. 2.Type COPY D:AFLASHAFLASH.EXE A: (assuming D is your CD-ROM drive) to copy AFLASH.EXE to the just created boot disk. NOTE: AFLASH works only in DOS mode. It will not work with DOS prompt in Windows and will not work with certain memory drivers that may be loaded when you boot from your hard drive. It is recommended that you reboot using a floppy. 3.Reboot your computer from the floppy disk. NOTE: BIOS setup must specify floppy as the first item in the boot sequence. 4.In DOS mode, type A:AFLASH <Enter> to run AFLASH. 5.Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Current BIOS To File screen appears. 6.Type a filename and the path, for example, A:XXX-XX.XXX and then press <Enter>. ---------------------------------------------------------------------------------------- 1.2 Updating BIOS Procedures 1.Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONTACT INFORMATION on User Ma for details) and save to the disk you created earlier. 2.Boot from the disk you created earlier. 3.At the A: prompt, type AFLASH and then press <Enter>. 4.At the Main Menu, type 2 and then press <Enter>. The Update BIOS Including Boot Block and ESCD screen appears. 5.Type the filename of your new BIOS and the path, for example, A:XXX-XX.XXX, and then press <Enter>. NOTE: To cancel this operation, press <Enter>. 6.When prompted to confirm the BIOS update, press Y to start the update. 7.The utility starts to program the new BIOS information into the flash ROM. The boot block will be updated automatically only when necessary. This will minimize the chance that a failed update will prevent your system from booting up. When the programming is finished, Flashed Successfully will be displayed. NOTE: When you see the message "Boot Block is different" you may still press <Y> to update the BIOS. Yet if the update fails, your system will run a greater risk of boot failure depending on whether the boot block is damaged or not. 8.Follow the onscreen instructions to continue. Dit maakt een hoop duidelijk. Maar hoezo jouw enigzins verbaasde reactie? Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Niet echt verbaasd, maar ik vond het formaat een beetje raar. Meestal eindigen biosfiles op .BIN, en niet op .003, vandaar :smile: Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Nog een opmerking. Gebruik geen Windows 95 op die Pentium want die herkent ook geen HDD's boven de 32GB. Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 We komen verder. Nee geen zorgen het OS is Win98. Maar nu nog de vraag, gebruik ik de pflash of de aflash.exe En ja ik dacht ook dat de files de ext. BIN hadden. Maar deze werd uitgepakt als .003 kan dit zijn omdat het een beta is zoals erbij stond vermeld? Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 beta's eindigen bij asus altijd op een nummer. om te flashen zou ik aflash nemen..... ftp://ftp.asuscom.de/pub/ASUSCOM/BIOS/BIOS_FLASH_UTILS/ [ Dit Bericht is bewerkt door: micky.g op 2002-03-24 18:37 ] Link naar reactie
anoniem Geplaatst: 24 maart 2002 Auteur Delen Geplaatst: 24 maart 2002 Thanks you all! :razz: Link naar reactie
anoniem Geplaatst: 25 maart 2002 Auteur Delen Geplaatst: 25 maart 2002 Nog even een laatste vraag aan micky_g. Kun je evengoed de bewuste file met de ext. .003 gebruiken voor het flashen van het bios of moet dit perse de ext. BIN hebben. :? Link naar reactie
anoniem Geplaatst: 25 maart 2002 Auteur Delen Geplaatst: 25 maart 2002 Ik heb een asus p2b-s met laatste bios (1013-7 is voor de -s de laatste) en heb een 80 GIG maxtor, zonder problemen aangesloten. De grens voor een 2pb schijnt(!?) te liggen op 128 GIG.... Zonder de laatste bios bleef hij hangen op 32 GIG. Er is overigens nog een laatste beta bios voor de p2b : de 1014-01 pflash is een flasher voor notebooks (!) niet gebruiken dus! Je moet de gewone aflash.exe hebben. Bij mijn weten zijn bios files voor asus altijd *.bin files... Voor het raadplegen van updates in de toekomst raad ik overigens aan om altijd de duitse site te bezoeken en niet de amerikaans, er schijnen verschillen te kunnen zijn tussen een amerikaans of taiwannees boord en een europees bord, de duitse site is in principe de plaats waar je je updates vandaan moet halen en niet de .com of .tw site http://www.asuscom.de/support/techmain/bios/bioslink.htm De *.003 file betekent dat het een beta is en moet (waarschijnlijk) worden hernoemd naar *.bin , weet dit niet zeker, dit was voorheen nl niet zo.... [ Dit Bericht is bewerkt door: rwilligen op 2002-03-25 02:03 ] Link naar reactie
anoniem Geplaatst: 25 maart 2002 Auteur Delen Geplaatst: 25 maart 2002 je kunt het bios gewoon met die filenaam flashen.... als hij naar de bios file vraagt moet je alleen de goede naam aangeven (met extensie .003 dus!) Link naar reactie
Aanbevolen berichten
Gearchiveerd
Dit topic is nu gearchiveerd en gesloten voor verdere reacties.