anoniem Geplaatst: 13 december 2001 Auteur Delen Geplaatst: 13 december 2001 3dfx :wink: )------------------ [This message has been edited by Slashhead (edited 13-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Iemand nog zin in een soldeer klus?(maar eerst een vertaalklus) http://www.multimania.com/coolpc/r8500.html Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 La paix de gâteau, même un sucker comme hjs peut faire le Travail------------------ [This message has been edited by Slashhead (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 The peace of cake, even a sucker like hjs be able do the Work en bedankt he :grin:even wat voor en na foto's Een quote vanuit het "andere" Radeon topic quote:ATI uses 5% resistors in memory voltage circuit. It should be 1% to guarantee connect Vmem. This mean a wide range of real Vmem. And in the most of LE (i think) this voltage is below manufacturer recomended range (3.2V-3.4V). for example at this forum Vmem was 3.17V. Simple replacing of 2 resistors at PCB allowed to increase mem freq up to 285 (it was possible to achive only 265 before this mod). p.s. I think ATI controls RTL/LE out ratio using such "inexact" resistors. It should only test real Vmem and mark a card as LE or RTL accordantly. p.s.s. there is some rumors about 8500 tv-out in russian forums: someone notice a difference between 7500&8500 tv-out. last one is capable to display only 800x600 (at last most of LE), but a 7500's tv-out is 1024x768!! I can't check this now so may be you can.... as far as I know, people increase voltage by changing the 2nd resistor (counting from left) in U8 line on card back.I was told that one russian guy is going to write a detailed article on 8500 voltage issues on www.radeon2.ru , hope he'll make an english version also. his opinion is that it might be a defect not a card design. he wrote that the 2 resistors nominals must be 910 ohm and 1.5kohm, but he measured them and they appeared to be 960 and 1.4, and the real voltage depends on their ratio. so he put real 910 and 1.5 resistors on his card, and get 3.3 or 3.4 v voltage, and his card become stable on 280/280. he flashed a retail bios and is very happy en dan het echte werk quote: Because this could give some confusion; this is a full translation of important topic on radeon2.ru. but be aware: as i know some people killed their 8500LE in attempts to do this properly )the attachment is a full thread. and the most important posts is from "Alexei" i translated only this post. [nbnhbnh] is my comments."the memoty chips on radeon 8500le (HY5DV641622AT) need 3 voltages: - for output cascades: 2.5V (VDDQ) - contacts No 3,9,15 - for chip itself: 3.3V VDD = legs 1,18,33 - reference voltage 0.5 VDDQ( VREF) = 49 - ground|common [i'm not sure which is right] = leg 49 I made some inventions in voltages of PoverMagic Radeon 8500LE. The results were impressive. Instead of 3.3 V (by specs) the VDD was only 3.17, but the spec the lower bound of Vdd is 3.2V!. VDDQ was 2.6 and DREF was 1.34 stabilazers are used to get volatges to card. one of them is "highly excact" LM2636 - to feed GPU itself. it is adjusted to 2.1V. others (3) create 3.3V, 2.5 & 1.25 V for RAM chips & something else.i can understand some thing about these stabilizers. The 3.3V stabilizer is located on the back side of PCB, near the chip "51031" & unsoldered connector. This is an impulse stabilizer of firm Shery CS5131. there are 2 unmarked resistors, capacitor & a dip (marked ar 000) at the left of this chip. The correlation between resistance of two these resistors assigns the output voltage of the stabilizer. In theory [hmm, i don't know why?] these resistors should be 910Ohm & 1.5kOhm from left to right accordingly. In real they were 960 & 1.4. Only "cool spesialists" in ATi knows, why the firm decided to spare at 1% exact resistors, using 5% resistors instead. As a result of these resistance scatter we have low VDD. This is the right way to count nessesary resistances. The best way is to use 4-digit digital voltmeter [vtvm?] 1. check Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 quote:Originally posted by hjs: The peace of cake, even a sucker like hjs be able do the Work en bedankt he :grin: Jemig wat heb jij een lamme vertaler..... :wink: Geen wonder dat die uitkomsten van Intromarkt zo "uniek" overkomen elke keer....------------------ [This message has been edited by Slashhead (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 quote:Originally posted by Slashhead: Jemig wat heb jij een lamme vertaler..... :wink: Geen wonder dat die uitkomsten van Intromarkt zo "uniek" overkomen elke keer....ja, en waarom ik het naar het engels vertaal is me ook een raadsel?wat is Intromarkt? Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Zo heet dat toch waar jij werkt ?Blijkbaar niet dus.... :grin:------------------ [This message has been edited by Slashhead (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Nee blijkbaar niet. :wink: Je weet mijn e-mail adres toch wel? nou dan weet je ook waar ik werk Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 oh ja ------------------ [This message has been edited by Slashhead (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Jij bent toch zo'n vlieggek?heb je IL2 al geziengespeeld? Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Neej, ik speel Falcon 4. F-16 simulator, lekker sleuren... Ik heb het wel gezien, maar ik heb MS-combat FS nog liggen. En dat vind ik niks aan, gaat me niet snel genoeg.------------------ [This message has been edited by Slashhead (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Ach, ik speel niks van die spellen, duurt allemaal veel te lang voordat je zoiets door hebt.Maar die IL2 lijkt me wel weer leuk. Het vliegtuig zelf was ook een leuke in WW2 op het oostfront. Hoe noemde de duitsers dat ding ook alweer? Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 stelletje OFF_TOPIC gasten hiero. vroeger hadden we nog een Modderator die daar wat aan deed :grin: http://www.ati.com/na/pages/resource_centre/dev_rel/demos.html Onthoud wel het zijn Avi's op een echte Radeon 8500 is de demo natuurlijk mooier. Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Ok dan zeikerd :wink:hjs, ik heb hier een Radeon 7500. Heb je nog een leuke demo voor me ?------------------ [This message has been edited by Slashhead (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 quote:Originally posted by Slashhead: Ok dan zeikerd :wink:hjs, ik heb hier een Radeon 7500. Heb je nog een leuke demo voor me ?lopen die nieuwe demo's op een 7500? geen idee, Radeon's Ark kan je natuurlijk proberen, lekker kontje heeft ze :wink:Even zoeken op Rage3d[This message has been edited by hjs (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Ik weet niet wat je bedoeld. Maar hier hebben ze alle planes in de showroom: http://www.il2sturmovik.com/games_elts/aircraft.php ------------------ [This message has been edited by Slashhead (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Ach ik weet het ook niet meer en het is teveel off-topic, ga denk ik de moderattor maar een mailtje sturen :grin: Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Voor FS is aniso en FSAA belangrijk. Ben benieuwd hoe lang het duur voordat we daar ook bumpmapping krijgen. (water, bomen vanuit de lucht ed.)------------------ [This message has been edited by Slashhead (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 14 december 2001 Auteur Delen Geplaatst: 14 december 2001 Ik vind die hele flightsims, op enkele na niet zo heel erg boeiend, je ziet de vijand op je radarscherm op je afkomen, schiet een AMRAAM (of liever Phoenix als je een F14 heb :smile:------------------ TB 1GHz@1.2GHz 512MB @150 mhz ABIT KT7A GF2 GTS (220@380) [This message has been edited by BA (edited 14-12-2001).] Link naar reactie
anoniem Geplaatst: 17 december 2001 Auteur Delen Geplaatst: 17 december 2001 quote:Originally posted by BA: Ik vind die hele flightsims, op enkele na niet zo heel erg boeiend, je ziet de vijand op je radarscherm op je afkomen, schiet een AMRAAM (of liever Phoenix als je een F14 heb :smile: IL2-Sturmovik is hetzelfde als met de A-10 ... ie : tanks etc vernietigen, geen radar (Do'h! WW 2-toestellen kenden dat nog niet :wink:) ... Er zit zelfs een complete map van Berlijn bij ...enige nadeel is dat ie om een of andere vreemde reden niet altijd wil starten. :sad: Er staat geen enkele specifieke R8500-instelling tussen. ------------------ - Red Kink FM - - JaFO's Bot-editor - - How many pirates did you kill today ? - Link naar reactie
Aanbevolen berichten
Gearchiveerd
Dit topic is nu gearchiveerd en gesloten voor verdere reacties.