anoniem Geplaatst: 16 maart 2006 Delen Geplaatst: 16 maart 2006 Op een Packard Bell wordt sinds kort gewerkt met Linux. Ik probeer het geluid in te stellen, maar dat lukt niet. Ook de hulp op [url] http://en.opensuse.org/SDB%3AMuted_Sound_Card[/url] geeft geen oplossing. Ik krijg nl. foutmeldingen bij punt 11 [code:1:e817cf820a]linux:~ # rcalsasound stop /usr/sbin/alsactl: get_control:149: Cannot read control info '2,0,0,Front Playback Volume,0': Invalid argument linux:~ # rm /etc/asound.state linux:~ # rcalsasound start linux:~ # alsactl store alsactl: get_control:149: Cannot read control info '2,0,0,Front Playback Volume,0': Invalid argument linux:~ # logout elja@linux:~> kamix & bash: kamix: command not found [1] 9742 [1] Exit 127 kamix elja@linux:~>[/code:1:e817cf820a] Wie kan mij helpen dit op te lossen?[/code] Quote Link naar reactie
anoniem Geplaatst: 16 maart 2006 Auteur Delen Geplaatst: 16 maart 2006 [quote:78168783e3="guidovanh"]Op een Packard Bell wordt sinds kort gewerkt met Linux. Ik probeer het geluid in te stellen, maar dat lukt niet.[/quote:78168783e3] Om welke type Packard Bell gaat het? Welke output toont commando [code:1:78168783e3] /sbin/lspci -tv [/code:1:78168783e3][Enter] Om welke versie van SuSE gaat het? En als je YaST start > Harware > Geluid. Welke info toont Sound Configuration bij Card Model? En als je klikt op Other > Volume. Daar checkt of de beide volume regelaars (Master & PCM) voldoende open staan, en klikt op Test. Quote Link naar reactie
anoniem Geplaatst: 16 maart 2006 Auteur Delen Geplaatst: 16 maart 2006 [quote:f683a63689="jolo"]Om welke type Packard Bell gaat het?[/quote:f683a63689] IXTREME GOLD H5305 (s/n: 040411220034) [quote:f683a63689="jolo"]Welke output toont commando [code:1:f683a63689] /sbin/lspci -tv [/code:1:f683a63689][/quote:f683a63689] Dat zal ik een volgend berichtje zetten, de computer is momenteel even niet beschikbaar. [quote:f683a63689="jolo"]Om welke versie van SuSE gaat het?[/quote:f683a63689] versie 10. [quote:f683a63689="jolo"]En als je YaST start > Harware > Geluid. Welke info toont Sound Configuration bij Card Model? En als je klikt op Other > Volume. Daar checkt of de beide volume regelaars (Master & PCM) voldoende open staan, en klikt op Test.[/quote:f683a63689] Dit antwoord volgt ook nog zodra ik weer achter de bewuste bak zit. Quote Link naar reactie
anoniem Geplaatst: 16 maart 2006 Auteur Delen Geplaatst: 16 maart 2006 [quote:5e0808a317="jolo"]Welke output toont commando [code:1:5e0808a317] /sbin/lspci -tv [/code:1:5e0808a317][/quote:5e0808a317] [code:1:5e0808a317]elja@linux:~> /sbin/lspci -tv -[0000:00]-+-00.0 Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller +-01.0-[0000:01]--+-00.0 ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] | \-00.1 ATI Technologies Inc: Unknown device 5b70 +-1b.0 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller +-1d.0 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 +-1d.1 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 +-1d.2 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 +-1d.3 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 +-1d.7 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller +-1e.0-[0000:02]--+-00.0 Smart Link Ltd. SmartLink SmartPCI562 56K Modem | +-01.0 Philips Semiconductors SAA7133 Video Broadcast Decoder | +-05.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ | \-07.0 Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) +-1f.0 Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge +-1f.2 Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller \-1f.3 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller elja@linux:~> [/code:1:5e0808a317] [quote:5e0808a317="jolo"]Om welke versie van SuSE gaat het?[/quote:5e0808a317] Versie 10 [quote:5e0808a317="jolo"]En als je YaST start > Harware > Geluid. Welke info toont Sound Configuration bij Card Model?[/quote:5e0808a317] 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [quote:5e0808a317="jolo"]En als je klikt op Other > Volume. Daar checkt of de beide volume regelaars (Master & PCM) voldoende open staan, en klikt op Test.[/quote:5e0808a317] Als ik klik Overig > Volume, dan kan ik alleen maar op Test klikken, maar er staat niets onder [i:5e0808a317]Andere kanalen[/i:5e0808a317].[/i] Quote Link naar reactie
Aanbevolen berichten
Om een reactie te plaatsen, moet je eerst inloggen