Ga naar inhoud

Wine?? maak me gek!?


anoniem

Aanbevolen berichten

heb Wine geinstalleerd (Mandrake 9.1) genaamd: Wine-20030813.tar.gz vrijwel alles ging best ok, na wat packages geinstalleerd te hebben... om de installatie te voltooien... jipppiiieeehhh. heb aardig wat info uitgeprint om het een succes te maken.. maarrrrrr... tja, daar komt de maar!!??... HET WERKT NIET! :oops: Volgens de handleiding moest ik eerst nog wat aanpassingen doen.. (e.g. "Error while loading shared libraries: libntdll.so"), make sure to add the library path to /etc/ld.so.conf and run ldconfig as root. --> allemaal gedaan. daarna heb ik nog wat gechecked in de winconfig file: file:/home/mac/.wine/config hierin staat het volgende: WINE REGISTRY Version 2 ;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config ;; If you think it is necessary to show others your complete config for a ;; bug report, filter out empty lines and comments with ;; grep -v "^;" ~/.wine/config | grep '.' ;; ;; MS-DOS drives configuration ;; ;; Each section has the following format: ;; [Drive X] ;; "Path"="xxx" (Unix path for drive root) ;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network') ;; "Label"="xxx" (drive label, at most 11 characters) ;; "Serial"="xxx" (serial number, 8 characters hexadecimal number) ;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix') ;; This is the FS Wine is supposed to emulate on a certain ;; directory structure. ;; Recommended: ;; - "win95" for ext2fs, VFAT and FAT32 ;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended) ;; DON'T use "unix" unless you intend to port programs using Winelib ! ;; "Device"="/dev/xx" (only if you want to allow raw device access) ;; ;; If wine was built with autofs patch, you can add a line ;; "Automount" = "1" ;; to sections with autofs_ed drives ;; [Drive A] "Path" = "/mnt/floppy" "Type" = "floppy" "Label" = "Floppy" "Filesystem" = "win95" "Device" = "/dev/fd0" [Drive C] "Path" = "/mnt/win_c" "Type" = "hd" "Label" = "Windows" "Filesystem" = "win95" [Drive D] "Path" = "/mnt/win_c" "Type" = "hd" "Label" = "/mnt/win_c" "Filesystem" = "win95" [Drive E] "Path" = "/mnt/win_c2" "Type" = "hd" "Label" = "/mnt/win_c2" "Filesystem" = "win95" [Drive F] "Path" = "/mnt/win_d2" "Type" = "hd" "Label" = "/mnt/win_d2" "Filesystem" = "win95" [Drive G] "Path" = "/mnt/win_e" "Type" = "hd" "Label" = "/mnt/win_e" "Filesystem" = "win95" [Drive H] "Path" = "/mnt/win_e2" "Type" = "hd" "Label" = "/mnt/win_e2" "Filesystem" = "win95" [Drive I] "Path" = "/mnt/win_f" "Type" = "hd" "Label" = "/mnt/win_f" "Filesystem" = "win95" [Drive J] "Path" = "/mnt/win_f2" "Type" = "hd" "Label" = "/mnt/win_f2" "Filesystem" = "win95" [Drive K] "Path" = "/mnt/win_g" "Type" = "hd" "Label" = "/mnt/win_g" "Filesystem" = "win95" [Drive L] "Path" = "/mnt/win_h" "Type" = "hd" "Label" = "/mnt/win_h" "Filesystem" = "win95" [Drive M] "Path" = "/mnt/cdrom" "Type" = "cdrom" "Label" = "CD-Rom" "Filesystem" = "win95" ; make sure that device is correct and has proper permissions ! "Device" = "dev=/dev/scd0,fs=auto,ro,--,iocharset=iso8859-1,codepage=850,umask=0" [Drive N] "Path" = "/mnt/cdrom2" "Type" = "cdrom" "Label" = "CD-Rom" "Filesystem" = "win95" ; make sure that device is correct and has proper permissions ! "Device" = "dev=/dev/hdd,fs=auto,ro,--,iocharset=iso8859-1,codepage=850,umask=0" [Drive O] "Path" = "${HOME}" "Type" = "network" "Label" = "Home" "Filesystem" = "win95" [Drive P] "Path" = "/tmp/winetmp-${USER}" "Type" = "hd" "Label" = "Tmp Drive" "Filesystem" = "win95" [wine] "Windows" = "C:\\Windows" "System" = "C:\\Windows\\system" "Temp" = "P:\\" "Path" = "C:\\Windows;C:\\Windows\\system;O:\\;P:\\" "Profile" = "C:\\Windows\\Profiles\\Administrator" "GraphicsDriver" = "x11drv" ;"ShowDirSymlinks" = "1" ;"ShowDotFiles" = "1" "ShellLinker" = "wineshelllink" # <wineconf> [Version] ; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31) "Windows" = "win98" ; DOS version to imitate ;"DOS" = "6.22" ; Be careful here, wrong DllOverrides settings have the potential ; to pretty much kill your setup. [DllOverrides] ; some dlls you may want to change "oleaut32" = "builtin, native" "ole32" = "builtin, native" "commdlg" = "builtin, native" "comdlg32" = "builtin, native" "shell" = "builtin, native" "shell32" = "builtin, native" "shfolder" = "builtin, native" "shlwapi" = "builtin, native" "shdocvw" = "builtin, native" "advapi32" = "builtin, native" "msvcrt" = "native, builtin" "mciavi.drv" = "native, builtin" "mcianim.drv" = "native, builtin" ; you can specify applications too ; this one will apply for all notepad.exe ;"*notepad.exe" = "native, builtin" ; this one will apply only for a particular file ;"C:\\windows\\regedit.exe" = "native, builtin" ; default for all other dlls "*" = "builtin, native" [x11drv] ; Number of colors to allocate from the system palette "AllocSystemColors" = "100" ; Use a private color map "PrivateColorMap" = "N" ; Favor correctness over speed in some graphics operations "PerfectGraphics" = "N" ; Color depth to use on multi-depth screens ;;"ScreenDepth" = "16" ; Name of X11 display to use ;;"Display" = ":0.0" ; Allow the window manager to manage created windows "Managed" = "Y" ; Use a desktop window of 800x600 for Wine ;"Desktop" = "800x600" ; Use XFree86 DGA extension if present ; (make sure /dev/mem is accessible by you !) "UseDGA" = "Y" ; Use XShm extension if present "UseXShm" = "Y" ; Use XVidMode extension if present "UseXVidMode" = "Y" ; Use the take focus protocol "UseTakeFocus" = "Y" ; Enable DirectX mouse grab "DXGrab" = "N" ; Create the desktop window with a double-buffered visual ; (useful to play OpenGL games) "DesktopDoubleBuffered" = "N" ; Code page used for captions in managed mode ; 0 means default ANSI code page (CP_ACP == 0) "TextCP" = "0" ; Use this if you have more than one port for video on your setup ; (Wine uses for now the first 'input image' it finds). ;; "XVideoPort" = "43" ; Run in synchronous mode (useful for debugging X11 problems) ;;"Synchronous" = "Y" ; ; Use the Render extension to render client side fonts (default "Y") ;;"ClientSideWithRender" = "Y" ; Fallback on X core requests to render client side fonts (default "Y") ;;"ClientSideWithCore" = "Y" ; Set both of the previous two to "N" in order to force X11 server side fonts ; ; Anti-alias fonts if using the Render extension (default "Y") ;;"ClientSideAntiAliasWithRender" = "Y" ; Anti-alias fonts if using core requests fallback (default "Y") ;;"ClientSideAntiAliasWithCore" = "Y" ; [fonts] ;Read the Fonts topic in the Wine User Guide before adding aliases ;See a couple of examples for russian users below "Resolution" = "96" "Default" = "-adobe-helvetica-" "DefaultFixed" = "fixed" "DefaultSerif" = "-adobe-times-" "DefaultSansSerif" = "-adobe-helvetica-" ;; default TrueType fonts with russian koi8-r encoding ;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r" ;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r" ;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r" ;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r" ;; default cyrillic bitmap X fonts ;"Default" = "-cronyx-helvetica-" ;"DefaultFixed" = "fixed" ;"DefaultSerif" = "-cronyx-times-" ;"DefaultSansSerif" = "-cronyx-helvetica-" ; the TrueType font dirs you want to make accessible to wine [FontDirs] ;; standard ttf font dir "dir1" = "/usr/X11R6/lib/X11/fonts/TTF" ;; this should be on most boxes "dir2" = "/usr/share/fonts/ttf/western" ;; drakfont dir ;"dir3" = "/usr/X11R6/lib/X11/fonts/drakfont/ttf" ;; ms webfonts ;"dir4" = "/usr/X11R6/lib/X11/fonts/msttcorefonts" [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4" = "/dev/modem" [parallelports] "Lpt1" = "/dev/lp0" [ppdev] ;; key: io-base of the emulated port ;; value : parport-device{,timeout} ;; timeout for auto closing an open device ( not yet implemented) "378" = "/dev/parport0" ;"278" = "/dev/parport1" ;"3bc" = "/dev/parport2" [spooler] "FILE:" = "tmp.ps" "LPT1:" = "|lpr" "LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile="/tmp/winetmp-${USER} -q -" "LPT3:" = "/dev/lp3" [ports] ;"read" = "0x779,0x379,0x280-0x2a0" ;"write" = "0x779,0x379,0x280-0x2a0" [Debug] ;"RelayExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection" ;"RelayInclude" = "user32.CreateWindowA" ;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection" ;"SpyExclude" = "WM_SIZE;WM_TIMER;" [registry] ;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false. ;Defaults are read all, write to Home ; Where to find the global registries ;"GlobalRegistryDir" = "/etc/wine"; ; Global registries (stored in /etc/wine) "LoadGlobalRegistryFiles" = "Y" ; Home registries (stored in ~user/.wine/) "LoadHomeRegistryFiles" = "Y" ; Load Windows registries from the Windows directory "LoadWindowsRegistryFiles" = "Y" ; TRY to write all changes to home registries "WritetoHomeRegistryFiles" = "Y" ; Registry periodic save timeout in seconds ; "PeriodicSave" = "600" ; Save only modified keys "SaveOnlyUpdatedKeys" = "Y" [Tweak.Layout] ;; supported styles are 'Win31'(default), 'Win95', 'Win98' ;; this has *nothing* to do with the windows version Wine returns: ;; set the "Windows" value in the [Version] section if you want that. "WineLook" = "Win98" [Console] "Drivers" = "tty" "XtermProg" = "nxterm" "InitialRows" = "25" "InitialColumns" = "80" "TerminalType" = "nxterm" [Clipboard] "ClearAllSelections" = "0" "PersistentSelection" = "1" ; List of all directories directly contain .AFM files [afmdirs] "1" = "/usr/share/ghostscript/fonts" "2" = "/usr/share/a2ps/afm" "3" = "/usr/share/enscript" "4" = "/usr/X11R6/lib/X11/fonts/Type1" [WinMM] "Drivers" = "winearts.drv" ;"Drivers" = "winejack.drv" ;"Drivers" = "wineoss.drv" "WaveMapper" = "msacm.drv" "MidiMapper" = "midimap.drv" [dsound] ;; HEL only: Number of waveOut fragments ahead to mix in new buffers. ;"HELmargin" = "5" ;; HEL only: Number of waveOut fragments ahead to queue to driver. ;"HELqueue" = "5" ;; Max number of fragments to prebuffer ;"SndQueueMax" = "28" ;; Min number of fragments to prebuffer ;"SndQueueMin" = "12" [Network] ;; Use the DNS (Unix) host name always as NetBIOS "ComputerName" (boolean, default "Y"). ;; Set to N if you need a persistent NetBIOS ComputerName that possibly differs ;; from the Unix host name. You'll need to set ComputerName in ;; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ComputerName\ComputerName, too. ;"UseDnsComputerName" = "N" ;; sample AppDefaults entries [AppDefaults\\iexplore.exe\\DllOverrides] "shlwapi" = "native" "rpcrt4" = "native" "ole32" = "native" "shdocvw" = "native" "wininet" = "native" "shfolder" = "native" "shell32" = "native" "shell" = "native" "comctl32" = "native" ; [AppDefaults\\setup.exe\\x11drv] "Desktop" = "800x600" ; ;[AppDefaults\\sol.exe\\Version] ;"Windows" = "nt40" ; ;; Some games (Quake 2, UT) refuse to accept emulated dsound devices. ;; You can add an AppDefault entry like this for such cases. ;[AppDefaults\\pickygame.exe\\dsound] ;"EmulDriver" = "N" # </wineconf> _____________________ Volgens mij gaat het dus om: [Drive C] "Path" = "/mnt/win_c" "Type" = "hd" "Label" = "Windows" "Filesystem" = "win95" dit is nl. allemaal ok. Als ik via KdiskFree de filemanager opstart, dan krijg ik het volgende: file:/mnt/win_c als ik nu op alle mogelijke manieren.. (volgens de handleiding): wine sol wine sol.exe wine c:\\windows\\sol.exe wine /usr/windows(bestaat helemaal niet)/sol.exe probeer op te starten, dan krijg ik alleen maar de melding: [root@inet mac]# wine c:\\windows\\sol.exe wine: cannot open /root/.wine : No such file or directory ook niet met: [root@inet mac]# wine c:\\windows\\write.exe wine: cannot open /root/.wine : No such file or directory staat er in de handleiding: to verify the correctness of the intstallation bla bla bla.. run ./tools/winecheck | less krijg ik: lines ?-?/? (END) Kan iemand mij vertellen wat er fout gaat????????????????????? HOOP IK...
Link naar reactie
Wine dien je toch te installeren als root?... :-? of kan een "user" ook gewoon "Wine" installeren. Daarnaast heb ik ook geprobeerd om als user "mac" de sol.exe en write.exe op te starten.. ook zonder resultaat. :cry: Ik zal later (als ik thuis ben) wel even posten welke foutmelding ik krijg. Of dien ik alles te deinstalleren en opnieuw te installeren als "user"? :( . Het liefst zou ik willen dat Wine voor iedere gebruiker werkt.. en niet alleen maar voor 1 user. Tot sraks. ps: wel grappig die gezichtjes!!
Link naar reactie
Heb je al eens geprobeerd om middels cd naar de directory te gaan waar de windows-executable(s) staan en vanuit die $PWD wine te starten met alleen de naam van de executable als argument. Hoewel je met shell-escaping vast het volledige pad als parameter kunt opgeven aan wine, maken die dos-slashes (\) het niet makkelijker. Windows filenames met spaties, gekke strepen, etc. zijn wel eens lastig te benaderen vanuit een script of de commandline in mijn ervaring.
Link naar reactie
[quote:ad54ecafc7="Mnijbroek"]Wine dien je toch te installeren als root?[/quote:ad54ecafc7] Ja en na de installatie maak je dat je wegkomt uit de root. Dus je ragt de rpm (rpm -i wine.rpm) of de source (./configure && make && make install) erop als root, logt uit en logt in als user. Als user maak je de config files onder je home-dir aan en als user draai je de progsels.
Link naar reactie

Om een reactie te plaatsen, moet je eerst inloggen

Gast
Reageer op dit topic

×   Geplakt als verrijkte tekst.   Herstel opmaak

  Er zijn maximaal 75 emoji toegestaan.

×   Je link werd automatisch ingevoegd.   Tonen als normale link

×   Je vorige inhoud werd hersteld.   Leeg de tekstverwerker

×   Je kunt afbeeldingen niet direct plakken. Upload of voeg afbeeldingen vanaf een URL in

×
×
  • Nieuwe aanmaken...