[SuSE 8.2]Radeon drivers compatibiliteit

[anoniem]

Hoi allemaal, De patch werkt hierzo niet (haalt in elk geval nix uit). (weet oof niet waar het *.diff filetje voor dient).... Ook UT2003 werkt niet goed. Zoals eerder gezegd is t beginscherm al BLUR (vette software redendering). Ook spoort de muziek niet (vet lelijk en loopt veel te snel met vage onder en boven toon-pieken) Ook kan ik geen levels laden en loopt hier X ook (net zoals bij jolo) vast als het schermpje "LOADING" opdoemd... Mijn conclusie is: Dat of er hier iets fout zit Of dat SuSE fglrx niet leuk vind En dat ik beter wat anders kan probere (kan iemand me n !goed! boek aanraden voor de shell/bash, zodat ik hier wat meer van snap? Misschien ga ik de overstap wel maken naar Mandrake of zelfs Slackie. K ga dr van uit dat ik meerdere linux distros naast elkaar kan draaien? Greetz E-razoor P.S. verdere tips etc zijn natuurlijk van harte welkom!!!!!!

[anoniem]

[quote:b95adc9838="E-Razoor"]En dat ik beter wat anders kan probere (kan iemand me n !goed! boek aanraden voor de shell/bash, zodat ik hier wat meer van snap?[/quote:b95adc9838] Bedoel je Linux algemeen? Engels - of Nederlandstalig? [quote:b95adc9838="E-Razoor"]Misschien ga ik de overstap wel maken naar Mandrake of zelfs Slackie. K ga dr van uit dat ik meerdere linux distros naast elkaar kan draaien? [/quote:b95adc9838] In principe is dat geen probleem, zolang je maar voldoende harddisk ruimte hebt.

[anoniem]

[quote:f3420ece50] Jolo schreef: E-Razoor schreef: En dat ik beter wat anders kan probere (kan iemand me n !goed! boek aanraden voor de shell/bash, zodat ik hier wat meer van snap? Bedoel je Linux algemeen? Engels - of Nederlandstalig? [/quote:f3420ece50] In principe bomt t me nix, of ik nu engels of nederlands lees. Alst maar een goed boek is ben ik tevreden :)

[anoniem]

//E-Razoor Een echt goed Linux boek kan ik natuurlijk niet adviseren. Ik kan je wel 1 voorbeeld ervan geven. Wat vind je van dit Linux boek? http://www.comcol.nl/bestel/bicxl0_e.htb#6676f Ik heb dit boek zelf niet, dus kan ik niet echt weten of dit boek goed is.

[anoniem]

Misschien een aardige suggestie zijn gewoon de SuSE boeken, die heb ik toen gelezen toen ik begon met GNU/Linux en die zijn me zeer bevallen.

[anoniem]

[quote:9436cae9cb="E-Razoor"]Heb nog ff een vraagje: Op de SuSE site staat deze update: '''New: Support for ATI IGP3x0 (A3/U1/A4/U2) chipsets for SuSE Linux 8.2''' Is dit een optie voor mijn kaart??, snap nl niet waar deze update voor is, maar dr staat wel wat met radeon tussen, zie ook deze ftp-site. [/quote:9436cae9cb] Op die ftp-site die je noemde, in een andere map staat een fglrx driver, die je nog wel zou kunnen proberen. ftp://ftp.suse.com/pub/suse/i386/supplementary/X/XFree86/ATI/suse82/fglrx/2.9.13 Alleen heb ik een toevoeging en een wijziging op de readme. # Start de PC op in init 3, via reboot, typ achter de boot prompt [b:9436cae9cb] init 3 [/b:9436cae9cb] [Enter] # Log in als root en verwijder de nu geinstalleerde fglrx driver [code:1:9436cae9cb] rpm -e fglrx-glc22 [/code:1:9436cae9cb] # Dan kun je de instructies van de readme uitvoeren. 1 en 2. Toen ik 3 met sax2 probeerde, werd het beeld zwart, en er gebeurde niks meer. Het configureren kan hier ook wel met [b:9436cae9cb] fglrxconfig [/b:9436cae9cb], maar toen bleek tuxracer niet goed te draaien. # Dus in plaats van fglrxconfig heb ik /etc/X11/XF86Config geedit. Als XF86Config-4 al bestaat, dan herbenoemen of verwijderen. In Section "Device" [code:1:9436cae9cb] driver "radeon" [/code:1:9436cae9cb] wijzigen in [code:1:9436cae9cb] driver "fglrx" [/code:1:9436cae9cb] In Section "Screen" [code:1:9436cae9cb] DefaultDepth 16 [/code:1:9436cae9cb] wijzigen in [code:1:9436cae9cb] DefaultDepth 24 [/code:1:9436cae9cb] SubSection "Display" [code:1:9436cae9cb] Depth 24 1024 x 768 [/code:1:9436cae9cb] bijvoorbeeld wijzigen in [code:1:9436cae9cb] Depth 24 "1024x768" "800x600" "640x480" [/code:1:9436cae9cb] Toevoegen aan Section "Module" [code:1:9436cae9cb] Load "dri" [/code:1:9436cae9cb] En zoals in 4 van de readme, typ [code:1:9436cae9cb] switch2f86_glx [/code:1:9436cae9cb] Met deze met deze wijzigingen ten opzichte van de readme, doet tuxracer het weer. Ook dat loading probleem in ut2003 is dan opgelost. Alleen 1 probleem bleef nog over. Als tijdens de Tutoral de scherm beveiliging de monitor op zwart zet, dan blijft het beeld zwart. Reageert dan niet meer op het toetsenbord. // E-Razoor Ik weet niet zeker of deze gewijzigde instructies voor jouw bruikbaar zijn, maar het valt te proberen.

[anoniem]

hmm, ook dit schijnt niet te werken. Indien ik in SaX een weiziging maak, en toepas, wordt het groene lichtje van mn monitor oranje, en krijg ik zwart scherm... Misschien wel handig om op te merken: De normale SuSE installatie liep bij mij vast. Pas toen ik de ACPI-off-installation koos, kwam mn pc de installatie periode door... Misschien ligt t hier aan?? Greetz, e-razoor

[anoniem]

[quote:4401026ea8="E-Razoor"] hmm, ook dit schijnt niet te werken. Indien ik in SaX een weiziging maak, en toepas, wordt het groene lichtje van mn monitor oranje, en krijg ik zwart scherm... [/quote:4401026ea8] Waarom sax2 niet werkt, dat weet ik ook niet. Daarom heb ik in mijn vorige bericht toegevoegd, hoe de fglrx driver van SuSE handmatig te configureren. Heb je dat intussen al geprobeerd?

[anoniem]

[quote:ad3a1902ca]Heb je dat intussen al geprobeerd?[/quote:ad3a1902ca] Yep ik heb da geprobeerd, maar t werkt niet dus.. 3ddiag zegt nog steeds dat er geen 3dkaart aanwezig is, en UT2003 doet t ook niet echt.... Beetje jammerlijk verhaal dus :-?

[anoniem]

[quote:cb83d8ff5c="E-Razoor"]3ddiag zegt nog steeds dat er geen 3dkaart aanwezig is[/quote:cb83d8ff5c] En glxinfo dan?[quote:cb83d8ff5c="E-Razoor"] en UT2003 doet t ook niet echt..[/quote:cb83d8ff5c] Dus je zag geen verschil? En tuxracer? Tja, ik denk dat nu wel alle mij bekende oplossingen heb genoemd. Misschien is die Radeon 9700 PRO met ASUS A7V8X+ en SuSE toch niet zo een goede combinatie is. Wellicht zou je nog met Yast2 > Diverse > Laat systeem log zien, controleren op fouten.

[anoniem]

Hey allemaal, mij vallen enige zaken op aan mn syslog. Zie hieronder: Sep 6 19:04:14 PC syslogd 1.4.1: restart. Sep 6 19:04:16 PC /etc/hotplug/usb.rc[822]: loaded HCD: ehci-hcd Sep 6 19:04:17 PC /etc/hotplug/usb.rc[822]: loaded HCD: usb-uhci Sep 6 19:04:17 PC /etc/hotplug/usb.rc[822]: loaded HCD: ehci-hcd Sep 6 19:04:19 PC kernel: klogd 1.4.1, log source = /proc/kmsg started. Sep 6 19:04:19 PC kernel: Inspecting /boot/System.map-2.4.20-4GB-athlon Sep 6 19:04:20 PC kernel: Loaded 20861 symbols from /boot/System.map-2.4.20-4GB-athlon. Sep 6 19:04:20 PC kernel: Symbols match kernel version 2.4.20. Sep 6 19:04:20 PC kernel: Loaded 429 symbols from 19 modules. Sep 6 19:04:20 PC kernel: Broadcom 4401 Ethernet Driver bcm4400 ver. 1.0.1 (08/26/02) Sep 6 19:04:20 PC kernel: PCI: Found IRQ 5 for device 00:09.0 Sep 6 19:04:20 PC kernel: eth0: Broadcom BCM4401 100Base-T found at mem dc800000, IRQ 5, node addr 00e018ba8045 Sep 6 19:04:20 PC kernel: ohci1394: $Rev: 758 $ Ben Collins <bcollins@debian.org> Sep 6 19:04:20 PC kernel: PCI: Found IRQ 10 for device 00:07.0 Sep 6 19:04:20 PC kernel: PCI: Sharing IRQ 10 with 00:08.0 Sep 6 19:04:20 PC kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[de000000-de0007ff] Max Packet=[2048] Sep 6 19:04:20 PC kernel: ieee1394: SelfID completion called outside of bus reset! Sep 6 19:04:20 PC kernel: ieee1394: Host added: Node[00:1023] GUID[00e01800000b4961] [Linux OHCI-1394] Sep 6 19:04:20 PC kernel: raw1394: /dev/raw1394 device initialized Sep 6 19:04:20 PC kernel: usb.c: registered new driver usbdevfs Sep 6 19:04:20 PC kernel: usb.c: registered new driver hub Sep 6 19:04:20 PC kernel: PCI: Found IRQ 3 for device 00:10.3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.0, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.1, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.2, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.3, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0 Sep 6 19:04:20 PC kernel: ehci-hcd 00:10.3: irq 9, pci mem e8989000 Sep 6 19:04:20 PC kernel: usb.c: new USB bus registered, assigned bus number 1 Sep 6 19:04:20 PC kernel: PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW. Sep 6 19:04:20 PC kernel: PCI: 00:10.3 PCI cache line size corrected to 64. Sep 6 19:04:20 PC kernel: ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 Sep 6 19:04:20 PC kernel: hub.c: USB hub found Sep 6 19:04:20 PC kernel: hub.c: 6 ports detected Sep 6 19:04:20 PC kernel: usb-uhci.c: $Revision: 1.275 $ time 19:05:30 Aug 6 2003 Sep 6 19:04:20 PC kernel: usb-uhci.c: High bandwidth mode enabled Sep 6 19:04:20 PC kernel: PCI: Found IRQ 3 for device 00:10.0 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.0, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.1, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.2, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.3, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: usb-uhci.c: USB UHCI at I/O 0xa400, IRQ 9 Sep 6 19:04:20 PC kernel: usb-uhci.c: Detected 2 ports Sep 6 19:04:20 PC kernel: usb.c: new USB bus registered, assigned bus number 2 Sep 6 19:04:20 PC kernel: hub.c: USB hub found Sep 6 19:04:20 PC kernel: hub.c: 2 ports detected Sep 6 19:04:20 PC kernel: PCI: Found IRQ 3 for device 00:10.1 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.0, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.1, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.2, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.3, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: usb-uhci.c: USB UHCI at I/O 0xa000, IRQ 9 Sep 6 19:04:20 PC kernel: usb-uhci.c: Detected 2 ports Sep 6 19:04:20 PC kernel: usb.c: new USB bus registered, assigned bus number 3 Sep 6 19:04:20 PC kernel: hub.c: USB hub found Sep 6 19:04:20 PC kernel: hub.c: 2 ports detected Sep 6 19:04:20 PC kernel: PCI: Found IRQ 3 for device 00:10.2 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.0, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.1, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.2, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.3, have irq 9, want irq 3 Sep 6 19:04:20 PC kernel: usb-uhci.c: USB UHCI at I/O 0x9800, IRQ 9 Sep 6 19:04:20 PC kernel: usb-uhci.c: Detected 2 ports Sep 6 19:04:20 PC kernel: usb.c: new USB bus registered, assigned bus number 4 Sep 6 19:04:20 PC kernel: hub.c: USB hub found Sep 6 19:04:20 PC kernel: hub.c: 2 ports detected Sep 6 19:04:20 PC kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Sep 6 19:04:20 PC kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 Sep 6 19:04:20 PC kernel: mice: PS/2 mouse device common for all mice Sep 6 19:04:20 PC kernel: bcm4400: eth0 NIC Link is Up, 100 Mbps full duplex Sep 6 19:04:20 PC kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Sep 6 19:04:20 PC kernel: sr0: scsi3-mmc drive: 4x/48x writer cd/rw xa/form2 cdda tray Sep 6 19:04:22 PC kernel: PCI: Found IRQ 4 for device 00:11.5 Sep 6 19:04:22 PC kernel: IRQ routing conflict for 00:11.5, have irq 9, want irq 4 Sep 6 19:04:22 PC kernel: PCI: Setting latency timer of device 00:11.5 to 64 Sep 6 19:04:24 PC smpppd[1215]: smpppd version 1.00 started Sep 6 19:04:25 PC kernel: IPv6 v0.8 for NET4.0 Sep 6 19:04:25 PC kernel: IPv6 over IPv4 tunneling driver Sep 6 19:04:25 PC sshd[1315]: Server listening on :: port 22. Sep 6 19:04:26 PC kernel: NETDEV WATCHDOG: eth0: transmit timed out Sep 6 19:04:27 PC /usr/sbin/cron[1590]: (CRON) STARTUP (fork ok) Sep 6 19:04:29 PC kernel: isapnp: Scanning for PnP cards... Sep 6 19:04:29 PC kernel: isapnp: No Plug & Play device found Sep 6 19:04:33 PC modprobe: modprobe: Can't locate module char-major-226 Sep 6 19:04:33 PC last message repeated 3 times Sep 6 19:04:33 PC kernel: [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes. Sep 6 19:04:33 PC kernel: [fglrx] module loaded - fglrx 3.2.0 [Jul 10 2003] on minor 0 Sep 6 19:04:33 PC kernel: Fire GL built-in AGP-support Sep 6 19:04:33 PC kernel: Based on agpgart interface v0.99 (c) Jeff Hartmann Sep 6 19:04:33 PC kernel: agpgart: Maximum main memory to use for agp memory: 439M Sep 6 19:04:33 PC kernel: agpgart: Detected a Via Apollo KT400 chipset in AGP v2 compat mode at 00:00.0 Sep 6 19:04:33 PC kernel: agpgart: Detected Via Apollo KT400 chipset Sep 6 19:04:33 PC kernel: agpgart: AGP aperture is 32M @ 0xfc000000 Sep 6 19:04:33 PC kernel: [fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset) Sep 6 19:04:33 PC kernel: AGP: Found 2 AGPv3 devices Sep 6 19:04:33 PC kernel: AGP: Doing enable for AGPv3 Sep 6 19:04:33 PC kernel: AGP: Setting up AGPv3 capable device at 0:0:0 Sep 6 19:04:33 PC kernel: AGP: Setting up AGPv3 capable device at 1:0:0 Sep 6 19:04:33 PC kernel: AGP: determined command value = 1f000b1a Sep 6 19:04:33 PC kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps) Sep 6 19:04:33 PC kernel: [fglrx] free AGP = 21245952 Sep 6 19:04:33 PC kernel: [fglrx] max AGP = 21245952 Sep 6 19:04:33 PC kernel: [fglrx] free LFB = 122683392 Sep 6 19:04:33 PC kernel: [fglrx] max LFB = 122683392 Sep 6 19:04:33 PC kernel: [fglrx] free Inv = 0 Sep 6 19:04:33 PC kernel: [fglrx] max Inv = 0 Sep 6 19:04:33 PC kernel: [fglrx] total Inv = 0 Sep 6 19:04:33 PC kernel: [fglrx] total TIM = 0 Sep 6 19:04:33 PC kernel: [fglrx] total FB = 0 Sep 6 19:04:33 PC kernel: [fglrx] total AGP = 8192 Sep 6 19:04:34 PC /etc/hotplug/net.agent[1359]: No HW description found ... exiting Sep 6 19:04:35 PC kernel: eth0: no IPv6 routers present Sep 6 19:04:44 PC kdm[1826]: pam_unix2: session started for user Obsolete, service xdm Sep 6 19:04:44 PC resmgr[989]: accepted connection from user root Sep 6 19:04:44 PC resmgr[989]: disconnect from root sep 6 19:05:19 PC su: (to root) Obsolete on /dev/pts/2 sep 6 19:05:19 PC su: pam_unix2: session started for user root, service su sep 6 19:05:19 PC su: pam_unix2: session finished for user root, service su sep 6 19:05:20 PC su: (to root) Obsolete on /dev/pts/2 sep 6 19:05:20 PC su: pam_unix2: session started for user root, service su -- Sep 6 19:04:33 PC kernel: [fglrx] total AGP = 8192 Sep 6 19:04:34 PC /etc/hotplug/net.agent[1359]: No HW description found ... exiting Zo te zien ontbreekt er een filetje, waardoor de driver niet werkt. Ook valt me op dat hij wat IRQ conflicten vertoont: have IRQ 9, want IRQ 3..... Iemand meer info te verschafen?,

[anoniem]

[quote:2ca9d0ea54="E-Razoor"]Sep 6 19:04:33 PC kernel: [fglrx] total AGP = 8192 Sep 6 19:04:34 PC /etc/hotplug/net.agent[1359]: No HW description found ... exiting Zo te zien ontbreekt er een filetje, waardoor de driver niet werkt. Ook valt me op dat hij wat IRQ conflicten vertoont: have IRQ 9, want IRQ 3..... Iemand meer info te verschafen?,[/quote:2ca9d0ea54] Zou je ook nog kunnen posten je [code:1:2ca9d0ea54] cat /proc/interrupts [/code:1:2ca9d0ea54] en je [code:1:2ca9d0ea54] /sbin/lspci -tv [/code:1:2ca9d0ea54]

[anoniem]

Owk, k ben n beetje laat, maar beter laat dan nooit: [quote:8ac9126172]Zou je ook nog kunnen posten je Code: cat /proc/interrupts[/quote:8ac9126172] PC@PC:~> cat /proc/interrupts CPU0 0: 85861 XT-PIC timer 1: 632 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 677 XT-PIC eth0 8: 2 XT-PIC rtc 9: 868 XT-PIC ehci-hcd, usb-uhci, usb-uhci, usb-uhci, VIA8233 10: 1 XT-PIC ohci1394 12: 41299 XT-PIC PS/2 Mouse 14: 11849 XT-PIC ide0 15: 195 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 PC@PC:~> [quote:8ac9126172] en je Code: /sbin/lspci -tv[/quote:8ac9126172] PC@PC:~> /sbin/lspci -tv -[00]-+-00.0 VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge +-01.0-[01]--+-00.0 ATI Technologies Inc Radeon R300 ND [Radeon 9700] | \-00.1 ATI Technologies Inc Radeon R300 [Radeon 9700] (Secondary) +-07.0 VIA Technologies, Inc. IEEE 1394 Host Controller +-08.0 Promise Technology, Inc. PDC20376 +-09.0 Broadcom Corporation BCM4401 100Base-T +-10.0 VIA Technologies, Inc. USB +-10.1 VIA Technologies, Inc. USB +-10.2 VIA Technologies, Inc. USB +-10.3 VIA Technologies, Inc. USB 2.0 +-11.0 VIA Technologies, Inc. VT8235 ISA Bridge +-11.1 VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE \-11.5 VIA Technologies, Inc. VT8233 AC97 Audio Controller PC@PC:~> Volgens mij is hier nix mis mee..... Maar men weet nooit... Bedankt voor je moeite jolo!

[anoniem]

[quote:81f8ef784a="E-Razoor"]cat /proc/interrupts [/quote:81f8ef784a] Hmm, de interrupt van de videokaart staat er niet bij. Als je PC opstart, dan vliegt doorgaans de PCI device listing voorbij. Als je op het moment dat je de PCI device listing ziet, drukt op de [b:81f8ef784a] Pause Break [/b:81f8ef784a] toets. Post dan de IRQ die je zie staan bij Display controller. Controleer tevens of andere PCI devices, dezelfde IRQ gebruiken als de videokaart. Post eventueel de hele PCI device listing. En verder zou je nu je die fglrx 2.9.13 driver van de SuSE ftp geïnstalleerd hebt, het volgende kunnen controleren in je /var/log/XFree86.0.log [code:1:81f8ef784a] (II) LoadModule: "glx" (II) LoadModule: "dri" (II) LoadModule: "fglrx" (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (--) fglrx(0): Chipset: "ATI RV250 If (R9000)" (Chipset = 0x4966) (--) fglrx(0): VideoRAM: 131072 kByte (64-bit DDR SDRAM) [/code:1:81f8ef784a] Maar dan bij Chipset, die van jouw videokaart. En ook [code:1:81f8ef784a] II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 2.9.13 (II) fglrx(0): Date: Jun 12 2003 (II) fglrx(0): Desc: ATI Fire GL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.4.20-4GB (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [DRI] installation complete (II)fglrx(0): Direct rendering enabled [/code:1:81f8ef784a] De Date en Version behoren wel overeen te komen.

[anoniem]

Hmm mijn Xfree ziet dr een beetje messed-up uit: (p.s. heb nu weer de betadrivers dr op gezet, maakt btw geen verschil..) [quote:dd788b14e2] W00ps[/quote:dd788b14e2] Als mn pc opstart, staat er op dat zwarte scherm, voordat grub opstart, dat mn grafische kaart IRQ 11 heeft. die is overigens in strijd met de vorige post, waarbij linux aangaf dat ie op 13 zat en naar 9 moest. Op IRQ=9, staan de usb controllers etcetc. Hoop dat dit voldoende info is... P.S. als ik ut2003 wil update, en commando ./update uitvoer in betreffende updates map, krijg ik een error, dat deze file niet aanwezig is en niet geopend kan worden :S Doe ik iets fout?? Greetz, E-razoor

[anoniem]

Hmm t ziet druit, dat mn Xfree n beetje naar zn malliemoer geholpen is :-? Hierbij stuur ik t gehele log wel ff op: [quote:04da5f2953] XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: SuSE Linux [ELF] SuSE Build Date: 17 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep 13 13:49:59 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Layout[all]" (**) |-->Screen "Screen[0]" (0) (**) | |-->Monitor "Monitor[0]" (**) | |-->Device "Device[0]" (**) |-->Input Device "Keyboard[0]" (**) Option "Protocol" "Standard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse[1]" (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin2/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/latin7/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/baekmuk" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/japanese" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/ucs/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/hellas/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/misc/sgi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled, /usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/75dpi:unscaled, /usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW, /usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/kwintv, /usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/uni:unscaled, /usr/X11R6/lib/X11/fonts/CID" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) Input device list set to "/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5, /dev/ttyS6,/dev/ttyS7,/dev/ttyS8,/dev/psaux,/dev/logibm, /dev/sunmouse,/dev/atibm,/dev/amigamouse,/dev/atarimouse, /dev/inportbm,/dev/gpmdata,/dev/mouse,/dev/usbmouse, /dev/adbmouse,/dev/input/mice,/dev/input/event0,/dev/pointer0, /dev/pointer1,/dev/pointer2,/dev/pointer3" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" (**) Option "Xinerama" "off" (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x800089fc, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3189 card 1043,807f rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr 00 (II) PCI: 00:08:0: chip 105a,3376 card 1043,809e rev 02 class 01,04,00 hdr 00 (II) PCI: 00:09:0: chip 14e4,4401 card 1043,80a8 rev 01 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:2: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3104 card 1043,808c rev 82 class 0c,03,20 hdr 00 (II) PCI: 00:11:0: chip 1106,3177 card 1043,808c rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1043,808c rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1043,8095 rev 50 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4e44 card 1002,0002 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4e64 card 1002,0003 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xde800000 - 0xdfefffff (0x1700000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe0000000 - 0xfbffffff (0x1c000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 ND [Radeon 9700] rev 0, Mem @ 0xf0000000/27, 0xdf000000/16, I/O @ 0xd800/8, BIOS @ 0xeffe0000/17 (--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secondary) rev 0, Mem @ 0xe0000000/27, 0xde800000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xfc000000 from 0xfdffffff to 0xfbffffff (II) Active PCI resource ranges: [0] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [1] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [2] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [3] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [4] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [5] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [6] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [8] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [9] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [11] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [12] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [13] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [14] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [15] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [16] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [17] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [18] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [19] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [1] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [2] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [3] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [4] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [5] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [6] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [8] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [9] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [11] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [12] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [13] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [14] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [15] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [16] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [17] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [18] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [19] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [7] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [8] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [9] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [10] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [11] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [14] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [19] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [20] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [21] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [22] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [23] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [24] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [25] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [26] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "v4l" (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.0.1 ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "fglrx" (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o (II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0, module version = 3.2.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) v4l driver for Video4Linux (II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000), ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000), ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9), ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO), ATI RV280 Ya (R9200), ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500), ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500), ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600), ATI RV350 AR (R9600 PRO), ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500), ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1), ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO), ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1), ATI R350 AK (Fire GL unknown), ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2), ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2), ATI R350 NH (R9800), ATI R350 NK (Fire GL unknown) (II) Primary Device is: PCI 01:00:0 (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI R300 ND (R9700 PRO) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [7] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [8] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [9] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [10] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [11] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [14] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [19] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [20] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [21] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [22] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [23] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [24] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [25] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [26] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) fglrx(0): pEnt->device->identifier=0x0820b2b0 (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [7] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [8] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [9] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [10] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [11] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [14] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [22] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [23] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [24] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [25] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [26] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [27] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [28] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [29] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [30] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [R200PreInit] === begin, [s] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): Qbs disabled (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (==) fglrx(0): Gamma Correction for I is 0x06419064 (==) fglrx(0): Gamma Correction for II is 0x06419064 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): initializing int10 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (--) fglrx(0): Chipset: "ATI R300 ND (R9700 PRO)" (Chipset = 0x4e44) (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002) (--) fglrx(0): board vendor info: original ATI grafics adapter (--) fglrx(0): Linear framebuffer (phys) at 0xf0000000 (--) fglrx(0): MMIO registers at 0xdf000000 (--) fglrx(0): ROM-BIOS at 0xeffe0000 (--) fglrx(0): ChipRevID = 0x02 (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM) (II) fglrx(0): board/chipset is supported by this driver (original ATI board) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): I2C bus "DDC" initialized. (II) fglrx(0): Connector Layout from BIOS -------- (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3 (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0 (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1 (II) fglrx(0): Primary head: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC (II) fglrx(0): Secondary head: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) fglrx(0): EDID data from the display on Secondary head --------------------------- (II) fglrx(0): Manufacturer: LTN Model: 1713 Serial#: 16843009 (II) fglrx(0): Year: 2002 Week: 52 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) fglrx(0): Sync: Separate (II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 (II) fglrx(0): Gamma: 2.88 (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.631 redY: 0.329 greenX: 0.276 greenY: 0.600 (II) fglrx(0): blueX: 0.143 blueY: 0.057 whiteX: 0.283 whiteY: 0.298 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 720x400@88Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@67Hz (II) fglrx(0): 640x480@72Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@56Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@72Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 832x624@75Hz (II) fglrx(0): 1024x768@87Hz (interlaced) (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@70Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1152x870@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 94.5 MHz Image Size: 306 x 230 mm (II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0 (II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0 (II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz (II) fglrx(0): Monitor name: e1770NSL/T (II) fglrx(0): Serial No: 252750781 (II) fglrx(0): (II) fglrx(0): DesktopSetup 0x0000 (==) fglrx(0): Overlay disabled (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=31000 (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (==) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total 3 valid mode(s) found. (--) fglrx(0): Virtual size is 1024x768 (pitch 1024) (**) fglrx(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 (**) fglrx(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz (II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) fglrx(0): Display dimensions: (320, 240) mm (**) fglrx(0): DPI set to (81, 81) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (==) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (==) fglrx(0): FSAAScale=1 (==) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0, module version = 3.2.0 ABI class: XFree86 Server Extension, version 0.2 (II) fglrx(0): Depth moves disabled by default (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): cpuFlags: 0x4000000f (==) fglrx(0): cpuSpeedMHz: 0x000007d0 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (==) fglrx(0): EnablePrivateBackZ = NO (II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024] (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B] [1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [8] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [9] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [10] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [11] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [12] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [13] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [15] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [16] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [17] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [21] 0 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [24] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [25] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [26] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [27] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [28] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [29] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [30] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [31] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [32] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [33] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default (II) fglrx(0): UMM area: 0xf0500000 (size=0x07b00000) (II) fglrx(0): driver needs XFree86 version: 4.3.x (II) fglrx(0): detected XFree86 version: 4.3.0 (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device) drmOpenDevice: open result is -1, (No such device) drmOpenDevice: Open failed drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmGetBusid returned '' (II) fglrx(0): [drm] loaded kernel module for "fglrx" driver (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [drm] added 8192 byte SAREA at 0xe8a08000 (II) fglrx(0): [drm] mapped SAREA 0xe8a08000 to 0x4001d000 (II) fglrx(0): [drm] framebuffer handle = 0xf0000000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 3.2.0 (II) fglrx(0): Date: Jul 10 2003 (II) fglrx(0): Desc: ATI Fire GL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.4.20-4GB-athlon (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0xdf000000 (II) fglrx(0): [agp] Mode=0x1f000a1b bridge: 0x1106/0x3189 (II) fglrx(0): [agp] AGP disable mask 0x00000000 (II) fglrx(0): [agp] enabling AGP with mode=0x1f000b1a (II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000312) (II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode) (II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672 (II) fglrx(0): [drm] texture shared area handle = 0xf0b30000 (II) fglrx(0): VisualConfigs initialized (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf0000000 FBMappedSize: 0x00500000 (II) fglrx(0): Splitting WC range: base: 0xf0000000, size: 0x500000 (==) fglrx(0): Write-combining range (0xf0400000,0x100000) (==) fglrx(0): Write-combining range (0xf0000000,0x500000) (II) fglrx(0): FBMM initialized for area (0,0)-(1024,1280) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption) (==) fglrx(0): Backing store disabled (==) fglrx(0): Silken mouse enabled (II) fglrx(0): Using hardware cursor (scanline 768) (II) fglrx(0): Largest offscreen area available: 1024 x 504 (WW) fglrx(0): Option "CalcAlgorithm" is not used (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 24 128x128 slots (II) fglrx(0): Acceleration enabled (II) fglrx(0): X context handle = 0x00000001 (II) fglrx(0): [DRI] installation complete (II) fglrx(0): Direct rendering enabled (II) Loading extension FGLRXEXTENSION (II) Loading extension ATITVOUT (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Keyboard "Keyboard[0]" handled by legacy driver (**) Option "Protocol" "imps/2" (**) Mouse[1]: Protocol: "imps/2" (**) Option "CorePointer" (**) Mouse[1]: Core Pointer (**) Option "Device" "/dev/mouse" (**) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse[1]: ZAxisMapping: buttons 4 and 5 (**) Mouse[1]: Buttons: 5 (II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE) (II) Mouse[1]: ps2EnableDataReporting: succeeded Could not init font path element /usr/X11R6/lib/X11/fonts/local, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/kwintv, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list! [/quote:04da5f2953] P.S. in het zwarte opstartsscherm (dus voordat ik in Grub kom) staat mn vidoedevicecontroller als enige op IRQ 11.. Dit is wel vreemd, omdat linux tijdens zijn boot aangeeft: Have IRQ 13 want 9.( zie ook log dat eerder gepost is) Op 9 zit volgens t zelfde zwarte scherm, mn communicatie controllers op, usb ed... Hoop dat dit voldoende info is... P.S. als ik ut2003 wil update, en commando ./update uitvoer in betreffende updates map, krijg ik een error, dat deze file niet aanwezig is en niet geopend kan worden :S Doe ik iets fout?? Greetz, E-razoor

[anoniem]

[quote:de8f94bb56="E-Razoor"]staat mn vidoedevicecontroller als enige op IRQ 11.. [/quote:de8f94bb56] Dan is dat in ieder geval in orde. [quote:de8f94bb56="E-Razoor"]Have IRQ 13 want 9.( zie ook log dat eerder gepost is) [/quote:de8f94bb56] Ehh, je bedoelde deze twee? [code:1:de8f94bb56] Sep 6 19:04:20 PC kernel: IRQ routing conflict for 00:10.0, have irq 9, want irq 3 Sep 6 19:04:22 PC kernel: IRQ routing conflict for 00:11.5, have irq 9, want irq 4 [/code:1:de8f94bb56] Op irq 9 heb je toch [code:1:de8f94bb56] 9: 868 XT-PIC ehci-hcd, usb-uhci, usb-uhci, usb-uhci, VIA8233 [/code:1:de8f94bb56]VIA8233 is toch je AC97 Audio Controller. En irq 3 en irq 4 worden doorgaans gebruikt door je seriele com poorten. Als deze niet gebruikt worden kun je deze eventueel in de BIOS uit zetten. [quote:de8f94bb56="E-Razoor"] P.S. als ik ut2003 wil update, en commando ./update uitvoer in betreffende updates map, krijg ik een error, dat deze file niet aanwezig is en niet geopend kan worden :S [/quote:de8f94bb56] Als deze foutmelding zoiets is als [code:1:de8f94bb56] Error: ut2003 not found, are you the one who installed it? [/code:1:de8f94bb56] Dan heb je dezelfde foutmelding als ik hier. Ut2003 werkt overigens nog wel. Uit je /var/log/XF86Config van Sat Sep 13 13:49:59 2003 blijk dat inderdaad ati driver version 3.2.0 Date: Jul 10 2003 weer geinstalleerd is. Terwijl we toch bezig waren met version 2.9.13. Trouwens, nu mijn Radeon 9000 videokaart weer in de PC zit waar die uit kwam, is de 3DDiag ook veranderd. [code:1:de8f94bb56] 3Ddiag version 0.691 Verifying 3D configuration: Using 3dinfo ************************************************************ Verifying 3D configuration based on XFree86 4 for 3D board "ATI Technologies Inc RV250 If (1002@4966)": Tests for package "XFree86-GLX": package ... done. package files ... done. Tests for correct OpenGL libraries/GLX extensions: Symbolic Links ... done. /etc/sysconfig/3ddiag (SCRIPT_3D=switch2xf86_glx) ... done. Test for correct XFree86 version ... done. Tests for XFree86 configuration: Config File /etc/X11/XF86Config ... done. Driver ... failed! ================================================================ 3D Hardware acceleration is not used. To use 3D Hardware acceleration please specify the entry Driver "radeon" in the Section "Device" of your /etc/X11/XF86Config. ================================================================ Color Depth ... failed! ================================================================ 3D Hardware acceleration is not used. To use 3D Hardware acceleration please specify one of these entries DefaultDepth 16 lines 1-35 [/code:1:de8f94bb56] Terwijl UT2003 nog steeds langs loading komt. Overigens had je die /var/log/XFree86.0.log van Sat Sep 13 13:49:59 2003 niet twee maal hoeven posten. En zou je a.u.b. die twee lange regels kunnen inkorten? Deze veroorzaken dat je in deze topic horizontaal moet scrollen.

[anoniem]

Ik heb nu weer de version 2.9.13 driver geinstalleerd, maar nu krijg ik x weer niet opgestart. Hij geeft een of andere buserror, dit adres stond overigens ook in het XF86Config filetje, wat aangepast moest worden. Ook krijg ik andere grafische toepassingen via de shell nu niet meer draaiend. Ik ga denk ik maar een nieuwe install houden, of anders het zelfde maar met mandrake te proberen. Bij mij is de bottleneck gewoon sax2. Overigens als ik in de prompt startx intyp wordt het scherm zwart. Als ik dan weer [ctrl]+[alt]+[F1] inhoud, zie ik die bus foutmelding in de prompt staan...

[anoniem]

[quote:a48d6344c8="E-Razoor"] Ik ga denk ik maar een nieuwe install houden, of anders het zelfde maar met mandrake te proberen. Bij mij is de bottleneck gewoon sax2.[/quote:a48d6344c8] Sax2 lijkt alleen een probleem te hebben, in combinatie met een ATI chipset video kaart. In combinatie met een NVIDIA chipset video kaart werkt sax2 wel.

[anoniem]

[quote:747db2011f]Sax2 lijkt alleen een probleem te hebben, in combinatie met een ATI chipset video kaart. In combinatie met een NVIDIA chipset video kaart werkt sax2 wel.[/quote:747db2011f] Jah ik weet dat je daar gelijk in hebt, maar ik heb zoiets van toch maar een andere distro probere, ipv een nieuwe 3d-kaart te kope :roll: Ik zal jullie wel ff op de hoogte houden, of t met mandrake ook weer zo 'lekker' verloopt... In elk geval thnx voor de moeite guys!