anoniem Geplaatst: 18 augustus 2003 Delen Geplaatst: 18 augustus 2003 Hallo lui, Ik zit met het volgende 'probleempje': Op de site van ATI ([url=http://www.ati.com/support/drivers/linux/radeon-linux.html?type=linux&prodType=graphic&prod=productsLINUXdriver&submit.x=12&submit.y=6]deze dan eh[/url]) staat aangegeven, dat de 'drivers' compatible zijn met Xfree86 versie 4.1.0 of met versie 4.2.0. Aangezien er bij SuSE 8.2 versie 4.3.0 wordt bijgeleverd, was mijn vraag oof een van deze 2 drivers op deze versie zoudenn kunnen draaien. En aanders de vraag: waar kan ik anders die drivers vandaan vissen?? Bij voorbaad dank voor jullie respons, E-razoor Quote Link naar reactie
anoniem Geplaatst: 18 augustus 2003 Auteur Delen Geplaatst: 18 augustus 2003 http://www.schneider-digital.de/html/download_ati.html Quote Link naar reactie
anoniem Geplaatst: 18 augustus 2003 Auteur Delen Geplaatst: 18 augustus 2003 ------ Quote Link naar reactie
anoniem Geplaatst: 18 augustus 2003 Auteur Delen Geplaatst: 18 augustus 2003 dank je marcel voor de link! hier kan ik verder mee :) Enkel resteerd 1 vraagje... Welke Fire staat gelijk aan de 9700 pro? [EDIT] lama zitte, heb t al :oops: :oops: :oops: :oops: Maar alsnog bedankt! Greetz, E-razoor Quote Link naar reactie
anoniem Geplaatst: 19 augustus 2003 Auteur Delen Geplaatst: 19 augustus 2003 ik heb enkel nog 1 vraagje. In de readme staat dit: Currently ATI provides Linux drivers for only one version of the c runtime library: - glibc22 (also known as libc62) To find out which c library you have, download the script 'Check.sh' and run it: sh Check.sh - [EDIT] Ik gebruik dus Xfree86 4.3.0, zoals standaard is opgenomen in de SuSE distro, en heb dus ook de Xfree86 4.3.0 versie driver gedownloaded. - en uit dit check script komt dit: ===================================================================== ATI Technologies ===================================================================== Checking which OS you're running... uname reports 'Linux' version '2.4.20-4GB-athlon', architecture 'i686'. Object format is 'ELF'. libc version is '6.3'. XFree86 Version 4.3.0 is installed. No package available for glibc 2.3. Try fglrx-glibc22.tgz Binary package name is 'fglrx-glibc21.tgz' kan ik deze drivers nu wel of niet draaien????? B.v.D. E-razoor Quote Link naar reactie
anoniem Geplaatst: 19 augustus 2003 Auteur Delen Geplaatst: 19 augustus 2003 Gewoon doen, ik heb dat hele check gebeuren nooit gedaan. Je ziet het vanzelf als het misgaat :P Quote Link naar reactie
anoniem Geplaatst: 20 augustus 2003 Auteur Delen Geplaatst: 20 augustus 2003 Tijdens de driver installatie, merkte het programma ongeveer t volgende op: Tailored Kernel module for fglrx not present on the system /lib/modules/fglrx/build_mod " ./make.sh" /lib/modules/fglrx "./make_install.sh" Error: no kernel module build environment installed: qt3 (gcc3.2) based control panel application Dit zal wel te maken hebben dat de kernel aangepast moet worden, voordat de 3D acceleratie gaat werken. Probleem is: Ik ken geen C (laatstaan C+) Na deze installatie (en na fglrxconfig te hebben gedraaid) kan ik mijn monitor instellingen niet meer via YAST weizigen. Ook van ATI control panel is nog niets te bekennen in het KDE menu.... Iemand suggesties? Misschien een meegelverde kernell update van SuSE ofzo?? B.V.D. E-razoor Quote Link naar reactie
anoniem Geplaatst: 20 augustus 2003 Auteur Delen Geplaatst: 20 augustus 2003 Controleer is of je kernel-source er wel op staat. [code:1:c18f534b99] ls /usr/src[/code:1:c18f534b99] daar moet een symlink linus zijn en een map met de kernel-source, als deze er niet na staat kun je bij pro nainstalleren van de cd en bij personal vanaf internet Quote Link naar reactie
anoniem Geplaatst: 21 augustus 2003 Auteur Delen Geplaatst: 21 augustus 2003 ik zie dit staan in /usr/src: PC@PC:~> ls /usr/src fglrx_panel_sources.tgz fglrx_sample_source.tgz packages PC@PC:~> ls /usr/src/packages BUILD RPMS SOURCES SPECS SRPMS PC@PC:~> ls /usr/src/packages/SRPMS PC@PC:~> PC@PC:~> ls /usr/src/packages/SOURCES PC@PC:~> t lijkt erop dat deze beide folders leeg zijn. Waarschijnlijk dus, zal dit het probleem moeten zijn. Enkel tussen ' installeren nieuwe software' staat nergens een kernell module tussen mbt fglrx. Ook kan ik niets vinden wat hier ook maar enige betrekking op kan hebben... detail: als ik bovengenoemd make.sh script uitvoer, geeft de shell die aan (ongeveer): ATI module generator V2.0 kernell includes at /usr/src/linux/ not found or incomplete file: /usr/src/linux/include/linux/version.h voor de rest doet ie nix..niet goed IMHO.. Advies? Quote Link naar reactie
anoniem Geplaatst: 21 augustus 2003 Auteur Delen Geplaatst: 21 augustus 2003 Oke je moet dus idd de kernel sources installeren. Je kunt deze gewoon in rpm voor downloaden en dan via YAST2 installeren. Je kunt gewoon een source toevoegen aan YAST2 en dan via de packetmanager gewoon een vinkje zetten bij de kernels-source. Quote Link naar reactie
anoniem Geplaatst: 21 augustus 2003 Auteur Delen Geplaatst: 21 augustus 2003 hmm bedoel je toevallig [url=http://www.suse.de/uk/private/products/suse_linux/i386/packages_professional/kernel-source.html]dit?[/url] In dat geval, ben ik een stukje verder gekomen :) dank u voor de hulp! Quote Link naar reactie
anoniem Geplaatst: 21 augustus 2003 Auteur Delen Geplaatst: 21 augustus 2003 Yep dat bedoel ik. Staat ook gewoon in de lijst van packages in YAST als je een ftp server toevoegt, installeer deze en probeer het dan opnieuw, zou moeten werken. Quote Link naar reactie
anoniem Geplaatst: 22 augustus 2003 Auteur Delen Geplaatst: 22 augustus 2003 owk we maken enigszins progressie...... enkel geeft ie nu weer een foutmelding: Error: kernel includes at /libs/modules/2.4.20-4GB-athlon/build/include do not match current kernel They are versioned as 2.4.20-4GB instead of 2.4.20-4GB-athlon You might to adjust your symlinks - /usr/include - /usr/src/linux owk, hier snap ik dus weer vrij weinig van.. Enkel dat ie mn athlon kernel niet mag... ik heb btw enkel de source geinstalleerd die betrekking heeft tot de lik hierboven.. Alvast bedankt voor hulp, Quote Link naar reactie
anoniem Geplaatst: 22 augustus 2003 Auteur Delen Geplaatst: 22 augustus 2003 Ik snap het al, de gecompileerde kernel die je gebruikt is anders dan de settings van de kernel sources. Je kunt de settings van je huidige kernel als het goed is uit je /proc device halen en vervolgens gewoon kopiëren naar de .config file in de kernel-sources. Iemand anders kan het waarschijnlijk wel iets gedetailleerder uitleggen. Quote Link naar reactie
anoniem Geplaatst: 23 augustus 2003 Auteur Delen Geplaatst: 23 augustus 2003 [quote:cc85183728=" E-Razoor"]kernel includes at /libs/modules/2.4.20-4GB-athlon/build/include do not match current kernel They are versioned as 2.4.20-4GB instead of 2.4.20-4GB-athlon p[/quote:cc85183728] Wat je dan moet doen staat beschreven in [url=http://www.linuxquestions.org/questions/showthread.php?postid=300960#post300960]deze reply[/url] op LinuxQuestions.org Dan deze instructies [code:1:cc85183728] You must go to /lib/modules/fglrx/build_mod subdir and execute './make.sh' to build a fully customed kernel module. Afterwards go to /lib/modules/fglrx and run './make_install.sh' [/code:1:cc85183728] Na het herstarten van X type je in een Konsole [code:1:cc85183728] glxinfo [/code:1:cc85183728] Als het werkt, staat er dit in [code:1:cc85183728] direct rendering: Yes [/code:1:cc85183728] Quote Link naar reactie
anoniem Geplaatst: 24 augustus 2003 Auteur Delen Geplaatst: 24 augustus 2003 Het goede nieuws: De drivers zijn geinstalleerd. Slechte nieuws: Nu start X niet meer op... /jolo. Die instructie staat ook omschreven in de readme-file. however, wanneer ik instal_make.sh uitvoer krijg ik deze error: " warming: loading /lib/modules/2.4.20-4GB-athlon/kernel/drivers/char/drm/fglrx.o will taint the kernel. more info see: www.tux.org/lkml/#export-tainted Ik heb de log van Xfree op floppy gezet... maar die heeft het zonet begeven.. :( ik zal zo wel ff update Quote Link naar reactie
anoniem Geplaatst: 24 augustus 2003 Auteur Delen Geplaatst: 24 augustus 2003 owk, bij deze de inhoud van mijn Xfree86.0.log -file: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: SuSE Linux [ELF] SuSE Build Date: 17 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Aug 24 11:06:22 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Server Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "ATI Graphics Adapter" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "microsoft" (**) XKB: model: "microsoft" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000003c, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3189 card 1043,807f rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10 hdr 00 (II) PCI: 00:08:0: chip 105a,3376 card 1043,809e rev 02 class 01,04,00 hdr 00 (II) PCI: 00:09:0: chip 14e4,4401 card 1043,80a8 rev 01 class 02,00,00 hdr 00 (II) PCI: 00:10:0: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:2: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3104 card 1043,808c rev 82 class 0c,03,20 hdr 00 (II) PCI: 00:11:0: chip 1106,3177 card 1043,808c rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1043,808c rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1043,8095 rev 50 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4e44 card 1002,0002 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,4e64 card 1002,0003 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xde800000 - 0xdfefffff (0x1700000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe0000000 - 0xfbffffff (0x1c000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 ND [Radeon 9700] rev 0, Mem @ 0xf0000000/27, 0xdf000000/16, I/O @ 0xd800/8, BIOS @ 0xeffe0000/17 (--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secondary) rev 0, Mem @ 0xe0000000/27, 0xde800000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xfc000000 from 0xfdffffff to 0xfbffffff (II) Active PCI resource ranges: [0] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [1] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [2] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [3] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [4] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [5] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [6] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [8] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [9] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [11] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [12] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [13] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [14] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [15] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [16] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [17] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [18] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [19] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [1] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [2] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [3] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [4] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [5] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [6] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [8] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [9] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [11] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [12] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [13] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [14] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [15] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [16] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [17] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [18] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [19] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [7] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [8] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [9] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [10] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [11] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [14] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [19] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [20] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [21] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [22] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [23] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [24] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [25] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [26] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="The XFree86 Project" compiled for 4.3.0, module version = 2.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "fglrx" (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o (II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0, module version = 3.2.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000), ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000), ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9), ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO), ATI RV280 Ya (R9200), ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500), ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500), ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600), ATI RV350 AR (R9600 PRO), ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500), ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1), ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO), ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1), ATI R350 AK (Fire GL unknown), ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2), ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2), ATI R350 NH (R9800), ATI R350 NK (Fire GL unknown) (II) Primary Device is: PCI 01:00:0 (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI R300 ND (R9700 PRO) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [7] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [8] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [9] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [10] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [11] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [14] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [19] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [20] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [21] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [22] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [23] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [24] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [25] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [26] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) fglrx(0): pEnt->device->identifier=0x0820c1d0 (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [6] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [7] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [8] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [9] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [10] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [11] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [13] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [14] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [15] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [21] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [22] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [23] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [24] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [25] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [26] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [27] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [28] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [29] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [30] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) fglrx(0): === [R200PreInit] === begin, [s] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "NoAccel" "no" (**) fglrx(0): Option "NoDRI" "no" (**) fglrx(0): Option "Capabilities" "0x00000000" (**) fglrx(0): Option "GammaCorrectionI" "0x00000000" (**) fglrx(0): Option "GammaCorrectionII" "0x00000000" (**) fglrx(0): Option "OpenGLOverlay" "off" (**) fglrx(0): Option "VideoOverlay" "on" (**) fglrx(0): Option "DesktopSetup" "0x00000000" (**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO" (**) fglrx(0): Option "HSync2" "unspecified" (**) fglrx(0): Option "VRefresh2" "unspecified" (**) fglrx(0): Option "ScreenOverlap" "0" (**) fglrx(0): Option "IgnoreEDID" "off" (**) fglrx(0): Option "UseInternalAGPGART" "no" (**) fglrx(0): Option "Stereo" "off" (**) fglrx(0): Option "StereoSyncEnable" "1" (**) fglrx(0): Option "UseFastTLS" "2" (**) fglrx(0): Option "BlockSignalsOnLock" "on" (**) fglrx(0): Option "ForceGenericCPU" "no" (**) fglrx(0): Option "CenterMode" "off" (**) fglrx(0): Option "FSAAScale" "1" (**) fglrx(0): Option "NoTV" "no" (**) fglrx(0): Option "TVStandard" "PAL-SCART" (**) fglrx(0): Option "TVHSizeAdj" "0" (**) fglrx(0): Option "TVVSizeAdj" "0" (**) fglrx(0): Option "TVHPosAdj" "0" (**) fglrx(0): Option "TVVPosAdj" "0" (**) fglrx(0): Option "TVHStartAdj" "0" (**) fglrx(0): Option "TVColorAdj" "0" (**) fglrx(0): Qbs disabled (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (**) fglrx(0): Gamma Correction for I is 0x00000000 (**) fglrx(0): Gamma Correction for II is 0x00000000 (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): initializing int10 (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (--) fglrx(0): Chipset: "ATI R300 ND (R9700 PRO)" (Chipset = 0x4e44) (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002) (--) fglrx(0): board vendor info: original ATI grafics adapter (--) fglrx(0): Linear framebuffer (phys) at 0xf0000000 (--) fglrx(0): MMIO registers at 0xdf000000 (--) fglrx(0): ROM-BIOS at 0xeffe0000 (--) fglrx(0): ChipRevID = 0x02 (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM) (II) fglrx(0): board/chipset is supported by this driver (original ATI board) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) fglrx(0): I2C bus "DDC" initialized. (II) fglrx(0): Connector Layout from BIOS -------- (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3 (**) fglrx(0): MonitorLayout Option: Monitor1--Type AUTO, Monitor2--Type AUTO (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0 (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1 (II) fglrx(0): Primary head: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC (II) fglrx(0): Secondary head: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) fglrx(0): EDID data from the display on Secondary head --------------------------- (II) fglrx(0): Manufacturer: LTN Model: 1713 Serial#: 16843009 (II) fglrx(0): Year: 2002 Week: 52 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) fglrx(0): Sync: Separate (II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 (II) fglrx(0): Gamma: 2.88 (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.631 redY: 0.329 greenX: 0.276 greenY: 0.600 (II) fglrx(0): blueX: 0.143 blueY: 0.057 whiteX: 0.283 whiteY: 0.298 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 720x400@88Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@67Hz (II) fglrx(0): 640x480@72Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@56Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@72Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 832x624@75Hz (II) fglrx(0): 1024x768@87Hz (interlaced) (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@70Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1152x870@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 94.5 MHz Image Size: 306 x 230 mm (II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0 (II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0 (II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz (II) fglrx(0): Monitor name: e1770NSL/T (II) fglrx(0): Serial No: 252750781 (II) fglrx(0): (II) fglrx(0): DesktopSetup 0x0000 (**) fglrx(0): Overlay disabled (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=31000 (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (**) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total 5 valid mode(s) found. (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280) (**) fglrx(0): *Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) fglrx(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz (II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 (**) fglrx(0): Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz (II) fglrx(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz (II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) fglrx(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz (II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (--) fglrx(0): Display dimensions: (320, 240) mm (--) fglrx(0): DPI set to (101, 108) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) fglrx(0): NoAccel = NO (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) fglrx(0): FSAAScale=1 (**) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany" compiled for 4.3.0, module version = 3.2.0 ABI class: XFree86 Server Extension, version 0.2 (II) fglrx(0): Depth moves disabled by default (**) fglrx(0): Capabilities: 0x00000000 (**) fglrx(0): cpuFlags: 0x4000000f (**) fglrx(0): cpuSpeedMHz: 0x000007d0 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): using built in AGPGART module: no (**) fglrx(0): UseFastTLS=2 (**) fglrx(0): BlockSignalsOnLock=1 (==) fglrx(0): EnablePrivateBackZ = NO (II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024] (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B] [1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xdc000000 - 0xdc0000ff (0x100) MX[B] [8] -1 0 0xdc800000 - 0xdc801fff (0x2000) MX[B] [9] -1 0 0xdd000000 - 0xdd01ffff (0x20000) MX[B] [10] -1 0 0xdd800000 - 0xdd800fff (0x1000) MX[B] [11] -1 0 0xde000000 - 0xde0007ff (0x800) MX[B] [12] -1 0 0xfc000000 - 0xfbffffff (0x0) MX[B]O [13] -1 0 0xde800000 - 0xde80ffff (0x10000) MX[B](B) [14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [15] -1 0 0xeffe0000 - 0xefffffff (0x20000) MX[B](B) [16] -1 0 0xdf000000 - 0xdf00ffff (0x10000) MX[B](B) [17] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [21] 0 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [24] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [25] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [26] -1 0 0x00009800 - 0x0000981f (0x20) IX[B] [27] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B] [28] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B] [29] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B] [30] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B] [31] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B] [32] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B] [33] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default (II) fglrx(0): UMM area: 0xf0700000 (size=0x07900000) (II) fglrx(0): driver needs XFree86 version: 4.3.x (II) fglrx(0): detected XFree86 version: 4.3.0 (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing DRIScreenInit drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenDevice: minor is 0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmGetBusid returned '' (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [drm] added 8192 byte SAREA at 0xe8a08000 (II) fglrx(0): [drm] mapped SAREA 0xe8a08000 to 0x4001d000 (II) fglrx(0): [drm] framebuffer handle = 0xf0000000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 3.2.0 (II) fglrx(0): Date: Jul 10 2003 (II) fglrx(0): Desc: ATI Fire GL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.4.20-4GB-athlon (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0xdf000000 (EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV" (EE) fglrx(0): cannot init AGP *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 11. Server aborting When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to http:/www.suse.de/feedback. K hoop dat jullie mij een aanwijzing kunnen geven waar ik wat mee kan doen.. Want enkel werken in de shell is IMHO ook weer niet alles.. :lol: Alvast bedankt!, E-razoor Quote Link naar reactie
anoniem Geplaatst: 24 augustus 2003 Auteur Delen Geplaatst: 24 augustus 2003 je hebt X gerconfigured met 'fglrxconfig' neem ik aan? het is een AGP kaart btw? Quote Link naar reactie
anoniem Geplaatst: 24 augustus 2003 Auteur Delen Geplaatst: 24 augustus 2003 Yep, t is een AGP (RADEON 9700 PRO/ RADEON 300 ND), en met fglrxconfig geconfigd.. heb bijna alle extra features uitgezet, zodat t hier ook niet aan kon liggen, maja ik krijg steeds zelfde respons wanneer ik X probeer te starten.. (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found (EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV" (EE) fglrx(0): cannot init AGP (error samenvatting van verhaal hierboven) Quote Link naar reactie
anoniem Geplaatst: 24 augustus 2003 Auteur Delen Geplaatst: 24 augustus 2003 [quote:73e34dccdf="E-Razoor "]heb bijna alle extra features uitgezet, zodat t hier ook niet aan kon liggen, maja ik krijg steeds zelfde respons wanneer ik X probeer te starten.. [/quote:73e34dccdf] En als je de vraag in fglrxconfig [quote:73e34dccdf] Do you want to use the external AGP GART module (y/n)? [/quote:73e34dccdf] beantwoord met y. En vervolgens voordat X gestart wordt typt [code:1:73e34dccdf] modprobe agpgart [/code:1:73e34dccdf] Start X dan wel op? Op het punt dat bij jouw in /var/log/XFree86.0.log fout gaat, had het zo verder kunnen gaan. [code:1:73e34dccdf] <knip> (II) fglrx(0): [drm] register handle = 0xed000000 (II) fglrx(0): [agp] Mode=0x1f000203 bridge: 0x8086/0x7190 (II) fglrx(0): [agp] AGP disable mask 0x00000000 (II) fglrx(0): [agp] enabling AGP with mode=0x1f000302 (II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000302) (II) fglrx(0): [agp] grafics chipset has AGP v2.0 (II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672 (II) fglrx(0): [drm] texture shared area handle = 0xd0a99000 (II) fglrx(0): VisualConfigs initialized (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x00500000 (II) fglrx(0): Splitting WC range: base: 0xd8000000, size: 0x500000 (==) fglrx(0): Write-combining range (0xd8400000,0x100000) (==) fglrx(0): Write-combining range (0xd8000000,0x500000) (II) fglrx(0): FBMM initialized for area (0,0)-(1024,1280) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption) (==) fglrx(0): Backing store disabled (==) fglrx(0): Silken mouse enabled (II) fglrx(0): Using hardware cursor (scanline 768) (II) fglrx(0): Largest offscreen area available: 1024 x 504 (**) Option "dpms" (**) fglrx(0): DPMS enabled (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 24 128x128 slots (II) fglrx(0): Acceleration enabled (II) fglrx(0): X context handle = 0x00000001 (II) fglrx(0): [DRI] installation complete (II)fglrx(0): Direct rendering enabled <knip> [/code:1:73e34dccdf] Deze log is van SuSE 8.2 met Radeon 9000. Bij mij start X wel. Maar als ik tuxracer vanuit een Konsole start, dan crashed 't [code:1:73e34dccdf] tuxracer (III)Tux Racer 0.61 -- a Sunspire Studios Production (http://www.sunspirestudios.com) (IV)(c) 1999-2000 Jasmin F. Patry <jfpatry@sunspirestudios.com> (V)"Tux Racer" is a trademark of Jasmin F. Patry (VI)Tux Racer comes with ABSOLUTELY NO WARRANTY. This is free software, (VII)and you are welcome to redistribute it under certain conditions. (VIII)See http://www.gnu.org/copyleft/gpl.html for details. (IX) (X)FATAL: fglX11FreeBuffer: firegl_FreeBuffer() failed! (XI)Trace/breakpoint trap (FIXME) (XII)jolo@linux:~> [/code:1:73e34dccdf] Quote Link naar reactie
Aanbevolen berichten
Om een reactie te plaatsen, moet je eerst inloggen