Ga naar inhoud

suse 8.1 vraagje


anoniem

Aanbevolen berichten

Na een instalatie van 8.1 wil cdrom niet meer mounten. Nu dacht ik de oplossing te hebben gevonden maar ik kom er ff niet uit. Dit is wat ik op de suse site erover vond: Some modules are missing from the initrd. From SuSE Linux 8.1 on, the CD drive support is no longer compiled and kept in the kernel, but implemented by way of modules (cdrom and ide-cd). As opposed to the module ide-scsi, those modules (cdrom and ide-cd) are not included in the Initrd. That is why the SCSI emulation reaches all drives and not only those listed in the kernel parameter hdX=ide-scsi. Solution Insert the modules cdrom and ide-cd in the variable INITRD_MODULES in the file /etc/sysconfig/kernel To do this, open the YaST Sysconfig Editor. Select Base-Administration -> Common-Basics -> initrd_modules and insert both modules before the module ide-scsi. Be careful not to remove any of the modules listed, since they are necessary for booting. Now, execute as root user the command mk_initrd To do this, start a terminal program like konsole or xterm and log in as root user with the command su -. Then enter the command mk_initrd. If your boot manager is LILO, reinstall it with the command lilo -v. This does not apply for GRUB. From SuSE Linux 8.1 on, GRUB is the standard boot loader. Nu is eigenlijk het probleem dat ik die opties in yast niet kan vinden Kan iemand mij uitleggen hoe ik mijn cd's weer kan mounten ?? Alvast bedankt Marcel
Link naar reactie
Nee deze oplossing is veel te lastig. Gaat het op een cdrom of dvd speler? Waarschijnlijk is dit genoeg: [code:1:b0e81ced21]rm /dev/cdrom && ln -s /dev/sr0 /dev/cdrom[/code:1:b0e81ced21] Om even te testen of sr0 idd je cdrom is doe je gewoon [code:1:b0e81ced21]eject /dev/sr0[/code:1:b0e81ced21] Als de lade open gaat is het de goede.
Link naar reactie
bedankt, dat werkt !! als ik het goed begrijp draait alles zo op scsi emulatie ik heb alleen nog een probleem met mijn dvdspeler de brander is sr0, cdrom sr1 en dus zou de dvd sr2 moeten zijn dat kan ik ook zien in het configscherm in kde maar als ik eject sr2 doe krijg ik de volgende foutmelding marcel@linux:~> eject sr2 eject: unable to eject, last error: Onjuist argument heb je nog enig idee hoe ik dit kan oplossen? Marcel
Link naar reactie

Om een reactie te plaatsen, moet je eerst inloggen

Gast
Reageer op dit topic

×   Geplakt als verrijkte tekst.   Herstel opmaak

  Er zijn maximaal 75 emoji toegestaan.

×   Je link werd automatisch ingevoegd.   Tonen als normale link

×   Je vorige inhoud werd hersteld.   Leeg de tekstverwerker

×   Je kunt afbeeldingen niet direct plakken. Upload of voeg afbeeldingen vanaf een URL in

×
×
  • Nieuwe aanmaken...