[SuSE 8.1] USB HP PSC 750 print wel, maar scant niet.

[anoniem]

Volgens de info op [url=http://www.linuxprinting.org/show_printer.cgi?recnum=HP-PSC_750]deze website[/url] zou de HP PSC 750 goed werken onder Linux. Voor het printen is dat inderdaad het geval, maar niet voor het scannen. Sane 1.09 backends en - frontends heb ik al geinstalleerd. Eveneens geinstalleerd hpijs 1.3 [code:1:1346cff215] jolo@node1048e:~> scanimage -d test -T scanimage: scanning image of size 157x196 pixels at 8 bits/pixel scanimage: acquiring gray frame, 8 bits/sample scanimage: reading one scanline, 157 bytes... PASS scanimage: reading one byte... PASS scanimage: stepped read, 2 bytes... PASS scanimage: stepped read, 4 bytes... PASS scanimage: stepped read, 8 bytes... PASS scanimage: stepped read, 16 bytes... PASS scanimage: stepped read, 32 bytes... PASS scanimage: stepped read, 64 bytes... PASS scanimage: stepped read, 128 bytes... PASS scanimage: stepped read, 256 bytes... PASS scanimage: stepped read, 255 bytes... PASS scanimage: stepped read, 127 bytes... PASS scanimage: stepped read, 63 bytes... PASS scanimage: stepped read, 31 bytes... PASS scanimage: stepped read, 15 bytes... PASS scanimage: stepped read, 7 bytes... PASS scanimage: stepped read, 3 bytes... PASS [/code:1:1346cff215] Deze test is in orde. [code:1:1346cff215] jolo@node1048e:~> sane-find-scanner # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. # No USB scanners found. If you expected something different, make sure that # you have loaded a driver for your USB host controller and have installed a # kernel scanner module. # Scanners connected to the parallel port or other proprietary ports can't be # detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. [/code:1:1346cff215] Sane kan dus geen scanner vinden. (Ook niet als root.) Ik heb via Yast2 > Hardware > Printer & scanner de HP PSC 700 series geselecteerd. De printer module wordt automatisch geladen. De scanner module niet. Dit staat overigens in /etc/modules.conf [code:1:1346cff215] options scanner product=0x1511 vendor=0x3f0 [/code:1:1346cff215] :roll:

[anoniem]

Download drivers van [url]http://hpoj.sourceforge.net/[/url]

[anoniem]

[quote:1ac6500b98="m021"]Download drivers van [url]http://hpoj.sourceforge.net/[/url][/quote:1ac6500b98] Als je hpijs 1.3 bedoelt. Die had ik al geinstalleerd. [code:1:1ac6500b98] jolo@node1048e:~> hpijs -h Hewlett-Packard Co. Inkjet Server 1.3 Copyright (c) 2001-2002, Hewlett-Packard Co. jolo@node1048e:~> [/code:1:1ac6500b98] :wink: